" DMC" MOTOR anyone seen one ???

[KASEY]

i have never seen a honda 90/110 copy till today. .. this is cdi ignition, 97cc's and a manual clutch.. first one i have ever seen, i compared the cases and its the same as a 90,,,,,, HMMMMM .... anyone ever see a DMC????? it really looks to nice to be a chinese copy..... no idea what it came out of only that it had 2 wheels ,,,,,

http://i1141.photobucket.com/albums/n592/KASEYII/DSC00155.jpg

http://i1141.photobucket.com/albums/n592/KASEYII/DSC00156.jpg

[leevarnado]

searched and couldnt anything on dmc,maybe someone else has better luck.

[KASEY]

i been searching... going to be interesting,,, to see what it is..

[Grindin' Gearz]

DeLoren Motor Company? Lol I very much highly doubt it, but it is a sharp lil piece of hardware, good luck!

[atc007]

When I saw the post,,I thought ,,yes,,,Dave Miller.. Nope,not his?? MAybe? Dave Miller Concepts was DMC back in the day. I know you know that though Kasey. Very cool,I have no clue where that would have came from. Guess you have the motor,try tracing it back a cpl owners!

[KASEY]

it came from bobs.. its been there years on a shelf back in a trailer ,, not much to go on there ,,,

[dougspcs]

Pretty sure someone I knew in the past had one of these DMCs..but it was a scooter/moped thing.

http://en.wikipedia.org/wiki/Daelim_Motor_Company

Korean company..

[shortline10]

Looks like a Honda trail bike sl/cl/ S90 replacement motor / clone . Notice the extra motor mount on the cases , 3 were the atc has 2 . It wont bolt up in a atc frame , the motor mounts are way off but I bet a trail bike collector would love to have it !!!!! . Talk mrclean into installing that manual clutch set up on his A+ bike .

[bcredneck]

ive seen that before that came out of trials bike that was so damb fun going of the trail and into the bush i loved that bike

[Mr. Clean]

Talk mrclean into installing that manual clutch set up on his A+ bike .

Now your talking!!! It wont take much for me to be convinced!!

[KASEY]

i was thinking of just pulling it apart next to a 90 / 110 motor and doing a complete swapover,,, then do a pullstart conversion,,, and WHAMM maunal clutch,, cdi,,, and a direct bolt in with all newer parts,,,

[shortline10]

Measure the cylinder length against your 90 motor , that will tell you if you can use one of those 90 strokers also check the flywheel at the crank to see if its the same design for the cdi swap . An sl90 crank is much shorter on the flywheel side . Lots of factors in a transplant . A custom size tranny shaft seal will also be needed if you use atc cases with that sl90 tranny .




i was thinking of just pulling it apart next to a 90 / 110 motor and doing a complete swapover,,, then do a pullstart conversion,,, and WHAMM maunal clutch,, cdi,,, and a direct bolt in with all newer parts,,,

[KASEY]

this motor has cdi. i will probably pull clutch side off of both and see what i find.. then do the same on the other side.. long before i split the cases..