yt60 throttle limit screw pic wanted

[Jon Boy]

ok after going through all the extra bolts i have i can't find one for a throttle limiter on the thumb throttle for the zinger. anyone happen to know the bolt size, thread and length? i'm getting the zinger straightened out for my brothers grandkids before i hand it over to him.

also on a sidenote, are these original tires?
74 atc70
136296

85 250es
136297

[dcreel]

I'm on crack.. you were talking too fast.. LOL

Yes, those are the original tires.. I was thinking YT60.. As far as the limit screw goes I'll pull mine out and run into town and check for you..

[Jon Boy]

cool, i was think those were the orginal tires for the Hondas, but wasn't totally sure.

posting a pic would be great dcreel. i'm wanting to use the right size of course, but i'm also wondering how it locks in. is there a locking nut or does it use a spring?

[Jon Boy]

ok, i found a bolt that's the right length and the size is close. has a good bit of play till it bottoms out, but it catches almost all of the thread. with all the extra bolts and stuff i have i can't believe i don't have a bolt for it. not too crazy about using the wrong size, then again it's not like i'm restoring it. just want it safe for the kids. i'll have to use a locking nut for sure.

edit: buying one is no problem. figured i could catch the Fastenal guy when he's in town (about 2-3times a week), but knowing the right size would be ideal. :lol:

[dcreel]

I went to the Hardware store to match mine up. I use the same screw and nut for my Tri-Zinger and my 87 LT80. Anyways, the hardware store was closed but according to the parts diagram for the LT80 the screw is a 5 X 25

http://i176.photobucket.com/albums/w182/dcreel/005-35.jpg

[Jon Boy]

cool thank you dcreel, i'm going to the parts store first thing Mon. morning. :beer