seal question 350x [Archive]

murfman

12-02-2011, 05:37 PM

What are you guys using for the seal that goes behind the drive sprocket on the side of the case? It is Honda part # 91205-HA5-000 and it shows as a 22x35x8 seal. It is obsolete from Honda. Mine looks to be in good condition, but I hate putting the machine back together with a used seal after everything I have done to the motor so far. Thanks in advance Murf

HondaHarry

12-02-2011, 06:00 PM

Just a quick search and I came up with this. Cant see why it wouldnt work. Honda-91271-752-003 OIL-SEAL-22X35X8
You can find just about any seal if you have the dimensions. HH

Big Mike

12-02-2011, 06:08 PM

Maybe this will work for ya:

https://www.kramp.com/shop/action/itemcatprd_10_-1_11451_161317_45080_502419_22358CC+Oil+seal+22x35 x8+CC

Dirtcrasher

12-02-2011, 07:04 PM

You just have to know your stuff.

Any bearing shop can get rubber coated seals, some are single lipped, most are double and spring backed. Harwal oil seals in Vermont gets me most of my seals, I just don't mess with the crank; There I use OEM.

Seals do have differences so as long as it appears to be a normal rubber coated dual lipped spring backed seal (whew!); Your good..........