PDA

View Full Version : KLT 110 Racks??


BiggDogg
12-13-2011, 04:38 PM
Hi Gang,

I did a search and got nothing for this.

Looking for more info on a Kawi KLT110 rear rack

other than finding one on ebay for close to what I bought the KLT for. I was wondering if anyone has one they are selling or at least has pictures and dimensions of one so I could try to build one

Any information would be good information
BiggDogg
12-16-2011, 09:15 AM
Nothing at all? well when I'm done refinishing my basement, I guess this will be my new mod/project.
thestud25
12-16-2011, 11:24 AM
I have not seen a KLT110 rack. Sorry that I cannot be of any assistance.
Frankencelery
12-16-2011, 12:35 PM
The original fenders on my KLT110 had holes in them like it had a rear rack at one time. Having another one would be great, but if they ever existed at all, they're rare as hen's teeth now. Of course it could have been another one adapted to work.
up-tyte
12-16-2011, 12:54 PM
We have a KLT 160 that had a rear rack on it, I will try to get some pics this weekend.
thestud25
12-16-2011, 01:16 PM
We have a KLT 160 that had a rear rack on it, I will try to get some pics this weekend.

That is a 160 not a 110 Scott!! :lol: My guess is that a 160 rack would bolt right up.

Just had to beat you up a little!
BiggDogg
12-16-2011, 02:46 PM
I've never seen a 160 in person to compare the frame in size to my 110. I don't know if it would bolt right up.
up-tyte
12-16-2011, 03:29 PM
thestud25, yea I know but we do also have 3 110s along with the 2 160s. I'll take a look at the frames and see how close they are.
Jon Boy
12-16-2011, 04:08 PM
haven't found any of just the rack, but found a couple pic of one mounted, should help out a little i figure. :beer
http://www.bikepics.com/kawasaki/klt110/85/pics.asp
up-tyte
12-16-2011, 10:19 PM
Here are some pics of the racks we have. The first 3 are a rack that was on a 160, it mounts with the grab bar and then to the rear tube on the frame, by the hitch. This one mounts partially over the plastics and still has access to the trunk. The last 2 are a rack that was on a 110, it mounts with the grab bar, the top two bolts on the axle and then also to the skid plate. This one mounts completely behind the plastics and made the trike really tail heavy, it is also about 39" wide by about 22". I can get some measurements if you like, hope this helps. Scott
BiggDogg
12-19-2011, 09:34 AM
Thank you guys, Up-tyte, I don't need the actual measurements i can take them off my KLT. This is allot of help. i will most likely try my hand at making one. one more simplistic like the 160 though. I'm all ready 215 lbs, I don't need any more weight on there lol