Jon Boy
12-17-2011, 11:27 AM
noticed past couple months some questions about the oil filter on the 90-125's. figured i'd try to help out a little. this is here off the site from arc20052000's thread titled "External site for Owners Manuals, Service Manuals, and Miscellaneous Documents" in the "World Class Help" section for the manual i'm recommending since everyone can get to these. http://3wheelermanuals.22web.net/
after you get the manual downloaded, everything you might want to basicly know about " 85 and Earlier 70-125 Centrifugal Oil Filter Rotor and Oil Filter Screen Cleaning" is right there on the second page of the PDF file. it's not hard to do and if careful you can reuse the old gasket, but getting a new one would be best.
the only real differance between this manual and the Clymer's i have sitting on my lap is where it says to wipe with a lint free rag, it also says "If necessary, scrape out any oil sludge with a broad-tipped dull screwdriver"
any questions and someone if not myself will try and help. good luck and happy filter cleaning. :beer :lol:
after you get the manual downloaded, everything you might want to basicly know about " 85 and Earlier 70-125 Centrifugal Oil Filter Rotor and Oil Filter Screen Cleaning" is right there on the second page of the PDF file. it's not hard to do and if careful you can reuse the old gasket, but getting a new one would be best.
the only real differance between this manual and the Clymer's i have sitting on my lap is where it says to wipe with a lint free rag, it also says "If necessary, scrape out any oil sludge with a broad-tipped dull screwdriver"
any questions and someone if not myself will try and help. good luck and happy filter cleaning. :beer :lol: