View Full Version : 200x carb question
YoungJay
01-01-2012, 05:45 PM
Ok so my 200x will start it will run but when u give it gas under load it don't want to move. Plus it wont idle on its own have to put the idle screw up alot makes it sound likes its screaming or its not enough. its an 1985 200x Bord 60 over thinking about cleaning it fully and hope that works and ideas will help me in any way thanks.
shortline10
01-01-2012, 06:44 PM
Jets are clogged !!!!!!! Buy a kit
YoungJay
01-02-2012, 03:41 AM
figured thanks mate =]
tri again
01-02-2012, 12:03 PM
x2 w/ sl.
I also wonder where the 200 gets it's spark advance from.
Is there a plate that rotates with spring return that may be stuck?
Clean jets AND internal passages.
They come off and apart so easily.
You may not even need a kit but best to have on hand before disassembly.
just in case.
AutoXer
01-02-2012, 07:58 PM
you can get a new carb (I have used two of them with great success ) almost as cheap as a kit
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.