ouate1to
01-26-2012, 07:48 PM
hello everyone. I'm from central indiana. i recently bought a 1984 250r, i runs alright but there are alot of thing i need to fix, change, whichever, so any advice or input would be greatly appreciated.
1. I have no brake pressure front or rear, im assuming master cylinders
2. I was told it has a 310 kit in it, but it still has stock exhaust and jetting. suggestions?
3. at a high rev it builds too much crank case pressure and starts puking oil out of the pressure release "nipple" under the carb to the point that it will empty out completely after an hour of hard riding
4. the wiring is a complete mess, i have to pop the clutch to shut it off. were can i find a diagram?
5. it is set up now for all acceleration and not much top end, i ride thru fields so that isnt any fun for me. what is a good all purpose sprocket tire combo for trail riding and some fields
6. and finally, were in the heck can i find those fork seal covers (rubber acordian style) that arent gonna break the bank.
thank you for readin.
1. I have no brake pressure front or rear, im assuming master cylinders
2. I was told it has a 310 kit in it, but it still has stock exhaust and jetting. suggestions?
3. at a high rev it builds too much crank case pressure and starts puking oil out of the pressure release "nipple" under the carb to the point that it will empty out completely after an hour of hard riding
4. the wiring is a complete mess, i have to pop the clutch to shut it off. were can i find a diagram?
5. it is set up now for all acceleration and not much top end, i ride thru fields so that isnt any fun for me. what is a good all purpose sprocket tire combo for trail riding and some fields
6. and finally, were in the heck can i find those fork seal covers (rubber acordian style) that arent gonna break the bank.
thank you for readin.