PDA

View Full Version : Can anyone ID this aftermarket tank?


atc350xer
02-06-2012, 12:43 PM
Another treasure I found while digging in the junkyard today. Anyone know the brand and what it fits?
brapp
02-06-2012, 01:46 PM
measure the distance from the front mounts tot he fenter of the bolt hole in the back imay have an idea.
shortline10
02-06-2012, 02:46 PM
I'm thinking 83-84 250r clark tank but i'm not positive .
atc350xer
02-06-2012, 03:15 PM
measure the distance from the front mounts tot he fenter of the bolt hole in the back imay have an idea.
Josh - Center of tank mount to center of bolt hole is right around 16 1/4"
Shortline - The aftermarket air cooled tanks had no shroud mounts?
atctim
02-06-2012, 03:30 PM
Matt - that is for sure an 83-84 ATC250R - Shortline nailed it, I have the same tank! A dead giveaway is the rear center tank mount. - Also, when I got mine it had a "Clark" logo on the cap, so I can safely assume that is a Clark tank as well.
shortline10
02-06-2012, 03:32 PM
The early clark tanks didnt have shrouds . Reason I say 83-84 250r is because of the right side petcock which eliminates all the 4 stroke models LOL .
atc350xer
02-06-2012, 03:33 PM
Matt - that is for sure an 83-84 ATC250R - Shortline nailed it, I have the same tank! A dead giveaway is the rear center tank mount.
Thank you sir... wonder if the petcock is still available? It's in nice shape except for 1 scratch below the gas cap. I have no 2 strokes... this may end up in the classifieds.