oil rotor specialty tool?

[200xman123]

Hey guys. How have you made your oil rotor tool on a 200x I'm trying make one. I do have a welder so I can weld I would just like an idea as to how to go about making one

[yaegerb]

I would just buy one. I bought this one and its lasted four builds. Link below.
http://www.bikebandit.com/motion-pro-oil-filter-clutch-hub-spanner?m=112776

[curtis slawson]

Here's one i made in about 1 hour or less. Take a 3/4 drive 13-16 inpack socket get a ginder or hacksaw and cut it out. Why waste money bying one only thing you cant make is a flywheeler puller.
142629

[Scratt]

I made one too in about a half hour with an impact socket and a die grinder.

[Scootertrash]

Work smarter not harder. 2 tools in one, 1/2 inch drive, shipped to your door, 11.88. This is what sits in my tool box.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&vxp=mtr&item=150749611116

3/4 drive 13/16 socket at Northern tool is 14.99+tax plus driving there and back, plus all the grinding.

1/2 drive is more than sufficient if you want to grind your own.