93 kingquad 250 brake adjustment

[Nubbinz]

Just Replaced the whole rear right end on my 93 kingquad 250 4wd. Its working great but the brakes need to be adjusted. My hand brake has been messed up since I got it and dont care about it, so im just wondering how to tighten up the foot brake for the rear. There appears to be 3 nuts on a screw. It makes no sense to me how you adjust it using those since the goal seems to be to get the screw to go in or out of the final nut to adjust it. I have a clymer manual for it and it just says to back out the stop nut and turn the screw through. Thats great but I dont see a way to turn the screw. Id appreciate any advice or a link to a video that shows how.

[Nubbinz]

Figgured it out. If anyone else is wondering the same thing, you pull back the brake cable boot, and it exposes a squared off tempered head on the bolt. Hold it still with a crecent wrench and turn the nut at the end to tighten or loosen.