atc90 w/ suspension fork swap, chopper?

[tblumer]

Swapped on a 185/200 fork setup, still a work in progress. What tire combos are you guys running? This thing is a chopper with the 22 out front. Any advice is appreciated. Any tips for stretching the seat onto this thing? I have the rear seat pan hooked up, do I need to hook the front plates in first?

http://i837.photobucket.com/albums/zz299/Tblumer/20120402_151944.jpg

[jb2wheels]

Put a pair of those same balloons on the rear like you have on the front.

I believe I bolted on the rear mini pan first, then the fron plates. I do remember I had a heck of a time getting a useable set of those plates. They are not reproduced although ATC Heaven in Australia will make a set.

144330 144331

[tblumer]

I kinda want the dirt tracker look, so I went with 18's out back.

[shortline10]

I like this Kenda on the front when using 18" tires on the back .
http://www.ebay.com/itm/Kenda-K284-Front-Max-Tire-20-x-7-00-8-Blackwall-082840874A1-/330707354727?pt=Motors_Car_Truck_Parts_Accessories&hash=item4cffb1c467

[tblumer]

How wide is the rim its on. I think mine is 8x8.5

[shortline10]

The rim in my pic is a 8X8 and its better to just use a tube to set the bead or lube one side of the rim up , set one bead and remove the tube and set the other side . I believe it only measured 19" tall after mounted



How wide is the rim its on. I think mine is 8x8.5

[tblumer]

The 22 I ethered on, the 18's had to be blown on with a cheetah tank.