250sx high idle

[slaughter]

so today i rebuild my carb and when i put it back in and started it up its at a really high idle i tried backing out the pilot screw but nothing and it even came out and it was still running high
im stumped can someone help

[big red in iowa]

try adjusting the throttle cable, or checking for leaks around the boot

[sinsayers]

X2 sounds like the cable or air leak. Start it up and turn your wheel left to right, she will rev or idle down if it is your throttle cable more than likely.
try adjusting the throttle cable, or checking for leaks around the boot

[Jason125m]

Its an air leak...

[Thorpe]

Or adjust you idle screw, vs. the pilot screw....

[slaughter]

i got it, it was the throttle cable i just did a little adjusting and it purs just right now