200x cam sprocket size

[jwilz]

I've searched and searched with no luck. I'm trying to find a measurement of the cam sprocket on a 84 200x. Trying to figure out why theres so much slack and rather than just replace everything i'd like to narrow it down. so please if anyone knows the diameter or anything so i can compare with mine to see if it's worn. It doesn't appear that worn but i know fravtions of a mm over the whole thing could add up and cause the problem. Thanx

[tri again]

Are those cam chain tensioners adjustable?

service manual

should get you some good specs too.

I bet there's lots of info on the search key.

[jwilz]

Yea i have it all the way adjusted to tight and still too much slack. From the help i got so far on my other post I'm thinking it may be the chain. Probably gonna order one tonight.

[kb0nly]

Its definitely the chain, i can tell you from experience, the chain wears out and stretches way before the sprockets are shot, you will probably go through 2-3 chains over the life of the trike but never replace the sprockets unless it was run way too long with a badly adjusted chain.