1st gen Tecate Case Saver?

[TecateDan]

Anyone know where I can get one or what will swap onto my first gen??

[cochran]

sblt500r makes them on here. They can be seen on Tecatekid's white Tecate.

[just ben]

sblt500r makes them on here. They can be seen on Tecatekid's white Tecate.his are the only "case saver" I have seen. the other ones I have seen are just a sprocket cover. I don't know if shawn is back into making parts yet though. I had him customized mine when he did it. I didn't care for the "250" on it

[nd4speed]

i am suurprised if I forgot to add this to my tecate swap thread, but I put like a 1996 KX250 case saver on my 86 KX250. So KX500 1986-2004 all had the same bolt pattern for the case saver, which basically means tons KX250/500 case savers are out there. You can see Chaplin Kawasaki try to peddle them on ebay for KXT at a jacked up rate of course. They are grey with three holes in them, but keep in mind that is the plastic part, there is a metal spacer part that is to me the real case saver. That spacer can be used to save your case but leave you room to remove the front sprocket.
I think difference in chain guide has to do with stock oem sprocket size.

Plastic front sprocket cover: 14026-1174

Model (30):
KDX250-D1 (KDX250) (1991)
KDX250-D2 (KDX250) (1992)
KDX250-D3 (KDX250) (1993)
KDX250-D4 (KDX250) (1994)
KX250-J1 (KX250) (1992)
KX250-J2 (KX250) (1993)
KX250-K1 (KX250) (1994)
KX250-K2 (KX250) (1995)
KX250-K3 (KX250) (1996)
KX250-K4 (KX250) (1997)
KX250-K5 (KX250) (1998)
KX250-L1 (KX250) (1999)
KX250-L2 (KX250) (2000)
KX250-L3 (KX250) (2001)
KX250-L4 (KX250) (2002)
KX250-M1 (KX250) (2003)
KX250-M2 (KX250) (2004)
KX500-E10 (KX500) (1998)
KX500-E11 (KX500) (1999)
KX500-E12 (KX500) (2000)
KX500-E13 (KX500) (2001)
KX500-E14 (KX500) (2002)
KX500-E15 (KX500) (2003)
KX500-E16 (KX500) (2004)
KX500-E4 (KX500) (1992)
KX500-E5 (KX500) (1993)
KX500-E6 (KX500) (1994)
KX500-E7 (KX500) (1995)
KX500-E8 (KX500) (1996)
KX500-E9 (KX500) (1997)

metal case saver/ spacer / chain guide: 12053-1172

Model (20):
KX500-B1 (KX500) (1985)
KX500-B2 (KX500) (1986)
KX500-C1 (KX500) (1987)
KX500-D1 (KX500) (1988)
KX500-E1 (KX500) (1989)
KX500-E10 (KX500) (1998)
KX500-E11 (KX500) (1999)
KX500-E12 (KX500) (2000)
KX500-E13 (KX500) (2001)
KX500-E14 (KX500) (2002)
KX500-E15 (KX500) (2003)
KX500-E16 (KX500) (2004)
KX500-E2 (KX500) (1990)
KX500-E3 (KX500) (1991)
KX500-E4 (KX500) (1992)
KX500-E5 (KX500) (1993)
KX500-E6 (KX500) (1994)
KX500-E7 (KX500) (1995)
KX500-E8 (KX500) (1996)
KX500-E9 (KX500) (1997)

metal case saver/ spacer / chain guide: 12053-1233

Model (13):
KDX250-D1 (KDX250) (1991)
KDX250-D2 (KDX250) (1992)
KDX250-D3 (KDX250) (1993)
KDX250-D4 (KDX250) (1994)
KX250-F1 (KX250) (1988)
KX250-G1 (KX250) (1989)
KX250-H1 (KX250) (1990)
KX250-H2 (KX250) (1991)
KX250-J1 (KX250) (1992)
KX250-J2 (KX250) (1993)
KX250-K1 (KX250) (1994)
KX250-K2 (KX250) (1995)
KX250-K3 (KX250) (1996)

[nd4speed]

see it from chaplin here:
http://www.ebay.com/itm/NEW-KAWASAKI-KXT-TECATE-3-ENGINE-SPROCKET-COVER-KXT250-/140844304462?hash=item20caf9884e&item=140844304462&pt=Motors_ATV_Parts_Accessories&vxp=mtr