CodyRosa
11-10-2012, 10:09 PM
Ok today when cleaning my carb out again I decided to take the choke off it completely and I forgot how to put the spring on. The spring goes underneath the choke lever on the carb. It's pinched inbetween the lever and the carb if you dont know. There is one way when I put on the spring that it looks right but apparently its wrong.. When I hooked it all back up and the choke cable to the carb that little flap in the carb is not fully opened like it should be and normally is. Also when I pull the choke (the knob by the handlebars) it only goes up about 3/4 inch when before it was about 1 1/2 to 2 inchs I could pull the thing.
This might be hard to understand or for you to explain to me so if anyone could take a picture (that's truly all I need) of their carb for me that would be great! I looked online at carbs but I could never see the spring.
Thanks everyone,
Cody
This might be hard to understand or for you to explain to me so if anyone could take a picture (that's truly all I need) of their carb for me that would be great! I looked online at carbs but I could never see the spring.
Thanks everyone,
Cody