PDA

View Full Version : Aluminum Swingarm ID


250Rjunky
12-04-2012, 10:31 PM
Anyone know what this aluminum swingarm is for or who made it?? Looks to possibly be for a Tecate, but I am not sure. It is 27" center to center and about 7.5" wide at the pivot area. This came with an 86 ATC 250R I bought, but is obviously not for that.

http://i45.tinypic.com/a2947o.jpg

http://i48.tinypic.com/20756ja.jpg
200x Basket
12-04-2012, 10:47 PM
thats not aluminum, or if it is in would be scared to ride on it
Xowner
12-04-2012, 11:03 PM
banshee swing arm? POST PICS OF THE SWINGARM ON THE BIKE YOU BOUGHT I WANT TO SEE IF IT WAS WHAT I THOUGHT IT WAS!!!!
250Rjunky
12-04-2012, 11:12 PM
banshee swing arm? POST PICS OF THE SWINGARM ON THE BIKE YOU BOUGHT I WANT TO SEE IF IT WAS WHAT I THOUGHT IT WAS!!!!

He he he. I am pretty sure it is......are the letters PT involved??
just ben
12-05-2012, 12:45 AM
+10 for a first gen t3 built at home from the looks of it by a guy with better welding skills than engineering skills. If you decide to part with it let me know. I think it could be useful to me with a lil more work.
Xowner
12-05-2012, 12:58 AM
He he he. I am pretty sure it is......are the letters PT involved??

i guessed that or Cal fab
250Rjunky
12-05-2012, 02:00 AM
i guessed that or Cal fab

Yes, I had thought it was going to be a cal fab and was pleasantly surprised. the dude had no idea what it was.
just ben
12-06-2012, 08:53 AM
correct me if I'm wrong but isn't the pivot tube on a banshee not cut out in the center? and the link/ shock mount is further back on a banshee. I'm still thinking t3,the 7 1/2"width is right for a t3
atc300r
12-06-2012, 09:24 AM
Are the main rails solid aluminum.I see a weld bead on the end off the tube where the carrier brackets are.This would be a good drag swingarm.
atc300r
12-06-2012, 09:27 AM
I think Ben is corect on it being Tecate.I measured a 86 250r swingarm at the pivot and its around 8 1/2 inches.wide.
Xowner
12-06-2012, 10:50 PM
correct me if I'm wrong but isn't the pivot tube on a banshee not cut out in the center? and the link/ shock mount is further back on a banshee. I'm still thinking t3,the 7 1/2"width is right for a t3

I never thought of that, That is a very good chance.