View Full Version : 87 KXT 250 Problem
JMiller
12-08-2003, 01:37 AM
I just finished bolting my cases back together, I replced my crank seals and berings. I installed the clutch and gears on the riht side of the engine, but when i rotate the motor and shift through the gears by hand, I cant find neutral,. The tranny goes into all gears except for neutral. Anybody have any ideas what could be the problem?
put trailprotrailpro motor back in the trike connect the chain back up and rock it back and forward while tryen to find neutral should make it alot easier hope this helps.
200x Basket
12-08-2003, 12:03 PM
neutral is a half click. if it actually goes into 1st and then 2nd, you will have neutral. my T# is very hard to find neutral while running. :?
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.