View Full Version : Stock fork weight oil 85 250sx
TecateDan
01-13-2013, 09:52 PM
Title says it all. Just need to know what the stock weight is. Didn't see it in the manual
Yamaha_Rules69
01-13-2013, 10:36 PM
I think a lot of the Hondas called for automatic transmission fluid, or ATF. That was probly before all the different types ond weights of fork oil came out. I have heard the ATF is basically 7weight. I would use 10 weight BelRay, thats what I use, and never had a problem. If you wanted to be real picky you could mix a 5 wt and a 10 wt, to make about a 7 wt, but I dont think you would ever notice a difference.
Flyingw
01-13-2013, 11:00 PM
The book says ATF and thats what I use. Type F.
TecateDan
02-19-2013, 10:14 PM
What is the spec for the amount of oil in each fork? I'd prefer to know the height rather than the amount but I'll take either measurement
Flyingw
02-19-2013, 11:14 PM
180cc in each tube and you should be good to go.
TecateDan
02-22-2013, 09:33 AM
I used 20W bell ray fork oil. Fabio Uses 10 and Geoff has 30 so the next ride Hopefully I can access all 3 weights
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.