A few pics of the atc 70 im fixing up!

[42F67N]

Heres some pics of the atc 70 i bought for my kid


Looked like this when i bought it
http://www.imagestation.com/picture/sraid92/pb04de1d370e0bdf5375286e8be59d807/fa5797e7.jpg
Carb and manifold removed for rebuild
http://www.imagestation.com/picture/sraid92/peeb728644139d1614f77e163ed5e0a9f/fa5797e1.jpg

Thanksgiving day cutting off the flywheel
http://www.imagestation.com/picture/sraid92/p3a7ed215e48c7b7c11d6034d8751df4e/fa5797d2.jpg

redid the forks
http://www.imagestation.com/picture/sraid92/p8fa3f5e0f2cc50c72d624a1832b3a8a4/fa5797db.jpg

Tank off for repaint
http://www.imagestation.com/picture/sraid92/p82820690aba64f89aa4a6ffba74d9337/fa5797de.jpg

Tank and forks painted
http://www.imagestation.com/picture/sraid92/pb89f4009af3dfb1950ce61be01a76e07/fa5797c9.jpg

Tank turned out good,guess all that body work my older brother taught me payed off lol
http://www.imagestation.com/picture/sraid92/p593eda03ad457d245d84a23e24ff87e6/fa5797c2.jpg

repainted the wheels axles and hubs
http://www.imagestation.com/picture/sraid92/pf302c321d90fef4954cd530648184dc4/fa5797be.jpg

I didnt take pictures of all the little stuff i did like cutting the chain to length,adjusting and cleaning the back breaks, acually rebuilding the carb ,amking my own gaskets ,messing with the kill switch,cutting the rear plastics down,polishing the handlebars to remove the rust making a new air filter repainting the airbox, fixing the exhaust but this is pretty much what it looks like now not finsished yet with the body needs a fender still and some other small things,then i gotta get it to run lol.
http://www.imagestation.com/picture/sraid92/p5698dcb02e7194a23d138ad3abe9ec88/fa5797bc.jpg

[jdparsons1]

I'll have to post some pics of the heap of junk 70 im rebuilding right now. The tank leaked, tires were bald, wheels were rusted, seat cover ripped, fenders cracked, handlebars bent, gaskets and seals leak, frame is scratched and rusty. Its actually coming along nicely, once i got it running i noticed a leak around the shift shaft and a bottom end gasket so i decided to tear the engine down and put a complete gasket set and oil seal set on it. Its alot of work and i could definitely buy one already in decent shape for what i am putting into it in time and money (up to $375) But at least this way i know the bike and i know whats been done to it. Also its kind of fun.

[42F67N]

yea its more fun to rebuild something and have it your own design then to just by one someone fixed up!

[350Xccelerator]

wow you did a pretty sweet job on it.

[jdparsons1]

Here it is. These are the before pics obviously, I have it COMPLETELY tore down right now. I hope to have it done by the end of the month. So far i've painted the rims and put new tires on, put a new seat cover on, painted the frame and some other miscellaneous parts, put a new piston and rings in the motor and it ran great but leaked from some of the lower end gaskets and seals so i have it tore all the way down right now and have the cases split. I also just got a newer tank that im going to paint along with the front forks. Will definitely post these again once im done and have the finished product. Just wanted to show what i have to work with.

http://parsons.dynu.com/atc70/before2.jpg
http://parsons.dynu.com/atc70/before1.jpg

[ATCRYDER]

Thats a good lookin 70. I like the Gas Tank Decals.