what tri z pipes are available and how much do they cost?

[ktmcrasher]

over in the UK there doesnt seem to be anybody selling tri z pipes. there are companies that will make custom systems but they get expensive & they would need to keep the trike to build it i guess.

DG PIPES!

its all i see for sale but id still need to get it shipped from the good old USA. so are there any other choices, what have people bought recently, do they look nice, do they seal well, sound, performancec, cost? etc


ive seen people mention Jemco, Dyno-port & phase 5 but i cant find prices, pictures or opinions


if im going to have to get something shipped over id like to get something a bit special. im trying to do a good build on my tri z & id really appreciate any information you guys might have for me

[pcs]

you have to message jemco and dyno port if you want one of their pipes. im also shopping around for a good pipe and do not want a dg pipe. i know shearer and ftz also make custom pipes.
the tri z in the center has a jemco and he is a member here, mine is the stock one so you can compare them visually

[zmpolaristech]

I sell the Dyno-Port Tri-Z pipes. They sell for $550 + ship for raw system, and $625 + ship for a ceramic coated system. If you are interested in one, contact me via PM. I am having more of these pipes built in the spring.

[ktmcrasher]

Do you have any pictures you could link or post of the dyno-port system?

[christph]

you have to message jemco and dyno port if you want one of their pipes. im also shopping around for a good pipe and do not want a dg pipe. i know shearer and ftz also make custom pipes.
the tri z in the center has a jemco and he is a member here, mine is the stock one so you can compare them visually

Wow, are you positive the center Z has a Jemco? With all the other Jemcos I have seen you can see the sections--it has fewer sections and is more angular. That pipe curves like a stamped pipe. If it is a Jemco I want one all the more.

[Yamaha_Rules69]

The phase 5 pipe is a LOT like a DG, but is not made anymore. It is an old school pipe. I have seen one side by side by a DG, and the only thing I noticed was that the Phase 5 didnt have the badge. Im not saying they couldnt be slightly different, but if anyone knows for sure, I would like to hear what I didnt see.

[pcs]

Wow, are you positive the center Z has a Jemco? With all the other Jemcos I have seen you can see the sections--it has fewer sections and is more angular. That pipe curves like a stamped pipe. If it is a Jemco I want one all the more.

the owner of that trike is a member here, i forgot his name of the forum but that is what he told me.

[pcs]

forgot to add
zmpolaristech: how does the dyno port compare to the lrd exhaust, more interested in the mid/top end of the rev range and how the power bands hits. on some earlier post i read that have had both exhaust.

[Bryan Raffa]

POWER ALL THE WAY THROUGH!!!.. cant wait to bolt mine up at the hill climb this weekend!!!!!! if you guys speak up we will tell him this weekend,,

[pcs]

you referring to the dyno port pipe bryan

[Bryan Raffa]

YES! I was talkin about Dynoport not sure about the LRD but I noticed that it pulls all the way through the top end.

[Mosh]

Dont forget, about 6 years ago I contacted CT racing and they said they would run ten pipes back then. At the time there was not much interest in TriZ building around here to warrant a group run. Wouldn't hurt to have one more design. Prices at the time were very reasonable. They may still do it.

http://www.3wheelerworld.com/showthread.php/75691-Are-there-any-aftermarket-pipes-for-Tri-Zs-other-than-DG?highlight=tri+ct+racing+pipe

[ktmcrasher]

Thanks for all the feedback guys. It looks like dyno-port is the one to go for If there's any available. This should be the last big part of my build that I need other than getting my forks re-chromed

[pcs]

any discounts for a group buy!!!! :naughty: