Lets see your Blasters!...

[ATCRYDER]

Photos and Modifications.

I'm tryin to get some good ideas and recommendations.

[Tri-Z Pilot]

Here's mine, blown up at the moment. As for some good mods, you can get an LRD pipe, which routes up the side of the bike like a 250R, (the stock pipe, and most aftermarket ones sit in front of the cylinder, and why would you want heat blowing on an air cooled cylinder)? Next up is the porting, you can get some serious power gains just by porting, the owner of trenga racing told me that a blaster stock porting is so meager, that no wonder a lot of people dis them. You can get a 240 big bore kit, along with a bigger carb and reed spacer, you could get like a rad valve or moto tassinari reed valve, or you could get a bulls eye intake with boost bottle attachment. Whatever you do though, buy an oil injection block off kit, the oil injection system should not be trusted. I would check out www.trengaracing.com, they have been racing and working on blasters for over 12 years, and they distribute parts world wide, what does that tell you?

[YAMAHA_Jim]

Both are 2000. One is stock and one is not. the flat tracker has 30mm carb,carbon fiber reeds,reed spacer,KN,LRD exaust,Renthal bars,MSR dominator levers,tether switch,msr gel grips,Hoosier 20.5x10 on Banshee rims,Carlisle 18x11x8 turfsavers on ITP red label rims,custom rear brake cable(-parking brake),DG steel nerfbars,CrazyG Racing struts,AC f bumper and swingarm bumper,DG grab bar,Maier # plates,and a few other small mods i cant think of right now. The blue on is 100% stock(except for purple plastic and seat).

[Dynofox]

Here's my bro's 03 with a pro circuit pipe and silencer, raptor hubs with banshee rims and fast trekker rear tires. For x-mas he is getting all yellow plastics other than the nose (going for the quad racer look) nac's racing seat cover and graphics package, +2 swing arm extender and a braided steel rear brake line. I can't wait to see it done, should look awesome! :-D

[jason85atc250r]

Triz Jim those front tires on the race bike look familiar :D they look good on there. hopefully you like them better then i did. they don't work for racing motocross they push in the corners. thats what they were intended for and they don't work they should work good for what you are doing.

[Honda300ex]

Here is mine beside the 300ex.. I just got the blaster sunday and my dad is already calling the 300ex "his" :D

http://www.imagestation.com/picture/sraid94/p9772011a496390b1ccc2bb0822a3cd0d/fa3aa1a6.jpg