Dave8338
06-06-2013, 01:57 PM
Been thinking of getting a 250R for awhile and found one on Craigslist yesterday... a CR 250R to be exact. :naughty:
Yeah, I know, not a three wheeler BUT is has the heart of the wheeler. Looks like this only not quite as nice, YET ! http://www.vintagefactory.com/87CR250.jpg
It needs a sleeve and piston combo and without magnafluxing the jug, it 'appears' to be OK.
So here are a few questions:
1) are the jugs the same as the 250R wheelers?
2) if I need a good jug, is there anyone on here that has a spare they would part with?
3) if needed, can I flip the reeds around and re-install? If not, what would you suggest I buy for new reeds.
Any pitfalls from the 250R folks that I should be looking out for?
Thanks, guy / gals
Dave
Yeah, I know, not a three wheeler BUT is has the heart of the wheeler. Looks like this only not quite as nice, YET ! http://www.vintagefactory.com/87CR250.jpg
It needs a sleeve and piston combo and without magnafluxing the jug, it 'appears' to be OK.
So here are a few questions:
1) are the jugs the same as the 250R wheelers?
2) if I need a good jug, is there anyone on here that has a spare they would part with?
3) if needed, can I flip the reeds around and re-install? If not, what would you suggest I buy for new reeds.
Any pitfalls from the 250R folks that I should be looking out for?
Thanks, guy / gals
Dave