My 1985 Honda 200X thread

[Yamada]

I bought this 3-wheeler from one of my friend. It is basically a roller with a engine and 2-3 box full of part and an extra chinese engine. I have a lot of work to do on it.
Bought the right carb for it, but I think now the float is sticking.
The kicker return spring is shot.
The clutch is slipping so much I can't bump start it.
Install a new clutch cable.
I need to install the rear brake pedal and fabricate the linkage.
Install the taillight.
Replace the rear axle bearing.
Rebuid the front brake master cylinder.
And there is a lot more detail I forgot.

For those who want to know, I paid 500$ for it.

http://www.youtube.com/watch?v=Hj9EhFqZ0ko

[rg97]

Not sure if you already know but from the pic looks like you'll be needing to replace fork seals as well.
Here are some clutch plates (http://goo.gl/ExKpj) (click on the link) that I have used on every machine and work amazing. last forever
I also paid 500 for mine which needed some TLC.

[dougspcs]

Well, it's at the top of the price range for a machine needing that much love..but then you do live in Canada and they are pricy here.

It's got good bones and the motor seems sound..with some money and some TLC it'll live again.

[Yamada]

Not sure if you already know but from the pic looks like you'll be needing to replace fork seals as well.
Here are some clutch plates (http://goo.gl/ExKpj) (click on the link) that I have used on every machine and work amazing. last forever
I also paid 500 for mine which needed some TLC.

Yeah I noticed the oil on the fork tube is brown and looks nasty. I'll have to add the fork to my list and put new boots also.

Around here for less than 500$ you have utility 3-wheeler that don't run or roller. Good thing I love to wrench and dump money into my toy :lol: