1982 front tire and bolt pattern?

[John 4]

I am wondering if any of you guys use or have used the kenda max 22x11x8 on the front? My concern is based on the typical problem that the ATC 250sx has with some tires rubbing through the forks because they are just a bit too wide. Is that also a problem on the 1982 250r?

Also I am wondering if the front bolt pattern is the same as the rear (4/130) on an 82 250r?

Thanks!

[manbearpig]

shouldnt be a problem. ive run a Kenda Front max through the dunes on my 82 250R without issue

front and rear bolt pattern for 82 250r is 4/130

[John 4]

Thanks, I appreciate it!

[350x'inNY]

Broome County? Did you get flooded out?

Some Suzuki Quadsport rims are 4/130 ... also the rear splines are the same from what I understand (not 100%). I bought a set of Durablue Rear Hubs and they were advertized as 24 spline 4/130 Quadsport and Honda and they slid right onto a NASA rear axle and a OEM axle.

Bruce "Hondaline" Hartman

PS.... OEM rear rims are interchangeable with front if I recall.... Can use 4/110 on rear by using a 24 spline hubs from 200X or 83-84R. 300EX hubs will gain you a couple inches with the more popular 4/110.

[John 4]

Broome County? Did you get flooded out?

Some Suzuki Quadsport rims are 4/130 ... also the rear splines are the same from what I understand (not 100%). I bought a set of Durablue Rear Hubs and they were advertized as 24 spline 4/130 Quadsport and Honda and they slid right onto a NASA rear axle and a OEM axle.

Bruce "Hondaline" Hartman

PS.... OEM rear rims are interchangeable with front if I recall.... Can use 4/110 on rear by using a 24 spline hubs from 200X or 83-84R. 300EX hubs will gain you a couple inches with the more popular 4/110. no recent flooding that I'm aware of, but I live on the highest point in Broome county.