Keepah Rolln
08-21-2013, 10:44 AM
Looking for some help with my ytm 200k. Heres the story, the oil was changed with correct oil and everything put back right. I started it about 8 months ago and only ran it about 3-4 mins and let it idle and shut it down when i noticed the carb overflowed when off. So i fixed the carb problem and than noticed the petcock started leaking. Anyways 8 months later i fixed the petcock leak and checked the oil again for fun. it was fine and at the same level. So i go inside the house and come back out and my dad was yanking on the rusted decompression cable with vice grips and pliers. He says now it should pull easier. I go to pull it over and it wont budge an inch...Do you think the engine seized from sitting or can it be something to do with him yanking on the decompression cable?? I just pulled on the pull cord about 3-4 weeks ago talking with a friend about the petcock leak and it was fine....