Trying to remove brake hub

[JROB]

Hello,
Im trying to remove the brake hub and front axle. It refuses to cooperate. Am I missing something here?:wondering
What do I need to do from this point?

176834176835

Thanks for your Time.:p

[shortline10]

Lots of heat at the threads of the axle and fork down tube , the 2 dissimilar metals have welded them selves together and HOPFULLY the axle spacers aren't stuck .

[dougspcs]

Heat, penetrating oil, long bar..all great, but I personally have never had one refuse to come apart with my impact gun and a good 17" impact socket..

Once it even took the threads out of the fork, but it came out just the same!!

[ps2fixer]

I had one of these buggers not long ago, I used my dad's "big bertha" impact (1 inch lol). Yea, it did nothing :(. Had to setup the forks in my dad's truck rack where it couldn't spin, and used a solid 1 inch breaker bar with the impact stock and a 5 foot pipe to get it to come out (yes I hit it with heat too). Good news for me, it unthreaded fine, bad news... the brake back plate was the problem child :(. I destroyed the hub trying to press the bolt out and still sits together in the scrap pile.