Question about front brake handle and cable connection.

[MonkOFox]

Ok so here is picture for reference of where I'm talking about:

177922

Ok so is there another piece besides the adjusting bolt (not the lock screw) that holds the brake cable into the recessed hole in the adjusting screw? Or do you just push it in there and use straps/zip-ties to hold it in there?

Thanks,

Justin

[dougspcs]

The cable tension at the brake end being set properly keeps it from coming out.

If there is too much slack then it'll pop out..see the proper brake adjustment procedure in the online manual for reference.

[MonkOFox]

Ah ok. I should have my new brake stuff in this next week. After i get all that hooked up I'll post if all doesn't go well.

Thanks for the help,

Justin