my 250r moving along

[probed_out]

I have slowly been getting my R up to my standards

heres a list of what I have done so far

body:

30mm bar risers and msr bars (im 6'5 and like the bars taller)
maier blem red rear fender and a black maier front fender
oem headlight
prm cooler rack

engine:

boyesen pro series reeds (kind of wish I would have tried v-force)
engine ice coolant
some sort of aftermarket pipe and silencer I don't know what brand but I got it cheap on ebay
new plug boot
re-jetted and lowered the float (was flooding bad po didn't know what he was doing lol gas was coming out of the overflow, so he plugged it off)
twin air air filter and uni air box vents


here is a few pics
http://i703.photobucket.com/albums/ww31/austinjensen_123/0518173011_zps2093b44a.jpg (http://s703.photobucket.com/user/austinjensen_123/media/0518173011_zps2093b44a.jpg.html)
when I first got it
http://i703.photobucket.com/albums/ww31/austinjensen_123/IMG_0160_zps197d1d40.jpg (http://s703.photobucket.com/user/austinjensen_123/media/IMG_0160_zps197d1d40.jpg.html)
http://i703.photobucket.com/albums/ww31/austinjensen_123/IMG_0159_zps0164b2ad.jpg (http://s703.photobucket.com/user/austinjensen_123/media/IMG_0159_zps0164b2ad.jpg.html)
these are during I don't have a real recent pic im going to take some tomorrow

anyways this is the pipe I put on it could someone id it for me? I have no idea what brand it is
http://i703.photobucket.com/albums/ww31/austinjensen_123/T2eC16dHJIQFHHEZdSqoBRzRb1U4Mg60_57_zps73fe2f9f.jp g (http://s703.photobucket.com/user/austinjensen_123/media/T2eC16dHJIQFHHEZdSqoBRzRb1U4Mg60_57_zps73fe2f9f.jp g.html)
http://i703.photobucket.com/albums/ww31/austinjensen_123/KGrHqNHJDcFHG6VodE0BRzRcPy3w60_57_zpsc7d7edfa.jpg (http://s703.photobucket.com/user/austinjensen_123/media/KGrHqNHJDcFHG6VodE0BRzRcPy3w60_57_zpsc7d7edfa.jpg. html)

I have been having lots of fun with this bad boy its no where near done my next step is going to be new tires all around and rebuild and the shocks im also planning on a larger carb, should I get the kehin 38mm or I would it be better to get the one from esr that's bored out to 41mm? im not planning on a bbk but probably going to port it some time in the future

[Gripit'n'ripit]

The silencer looks like an Answer.

[C.J]

That's an older DG silencer I do believe

[probed_out]

what about the header pipe?

http://i703.photobucket.com/albums/ww31/austinjensen_123/IMG_0342_zpsbc05e16b.jpg (http://s703.photobucket.com/user/austinjensen_123/media/IMG_0342_zpsbc05e16b.jpg.html)

http://i703.photobucket.com/albums/ww31/austinjensen_123/IMG_0344_zps82dc9190.jpg (http://s703.photobucket.com/user/austinjensen_123/media/IMG_0344_zps82dc9190.jpg.html)

http://i703.photobucket.com/albums/ww31/austinjensen_123/IMG_0343_zpsd4a4418f.jpg (http://s703.photobucket.com/user/austinjensen_123/media/IMG_0343_zpsd4a4418f.jpg.html)

http://i703.photobucket.com/albums/ww31/austinjensen_123/IMG_0345_zps4e688802.jpg (http://s703.photobucket.com/user/austinjensen_123/media/IMG_0345_zps4e688802.jpg.html)
recent pics!!

[probed_out]

well I discovered today its got a leaky headgasket so I ordered a whole gasket kit I'm going to try just changing the headgasket

[Marty]

have the cylinder head checked for squareness! that will also resolve leaky head gaskets as well!

[aldochina]

looking good so far. great place to ride it you have there!!

[atc300r]

Your head pipe looks like my DG head pipe for my 85 250r.On mine its stamped DG on the upper mounting tab.The trike looks great.

[rdlsz24]

Looking good. How many psi do you have in those rear tires? They look overinflated but it could just be the style.

Rob

[Ghostv2]

Thats really coming along. Looks like a really nice area to ride that bike too.
Its going to be a good rider.

[probed_out]

thanks guys when I pull the head pipe off to pop a few dents and paint it ill see if there is a stamp on it
rdlsz24 I have a bout 3 psi in the left tire the right one I just guess because it looses air every few days I haven't got around to fix it because I want new tires lol
marty I'm going to do that for sure I'm thinking about milling the head a little bit while its off