Help me get my 1980 Honda atc 110 running!

[Xman98]

I have a 1980 Honda atc 110 and it does not run. It has compression but no spark. Where do I start? Any tips and instructions? I have cleaned the carb and thats about it cause I don't really know anything about the electrical. Please help thanks!

[shortline10]

Replace the points .

[Xman98]

How much do they cost and where could i get some?

[Domi]

Check ebay. usually parts on there pretty cheap

[Xman98]

Is this only thing needed?
http://www.ebay.com/itm/Honda-ATC-110-1979-1980-Contact-Points-NEW-ATC110-/380724415973?pt=Motors_ATV_Parts_Accessories&hash=item58a4f18de5&vxp=mtr

How hard are they to replace, and do they need to be timed or something?

[shortline10]

http://www.dratv.com/noname93.html
How much do they cost and where could i get some?

[Xman98]

So Im going to buy the contact point, how hard is that to put on?

[Cornholio]

More Minnesotans? Where ya from?

[kb0nly]

Its not that hard to replace, unscrew it and remove it, take the wire off and then reassemble with the new set of points. Then you just set the gap on the points with a feeler gauge and your good to go. All the info is in the service manual, check the link below in my signature to go to my manuals website and grab a copy.

Fellow Minnesotan here as well!