350x valve guides question.

[blkstangman88]

Im installing new valve guides in my 350x. Does anyone know the recommended clearance from valve stem to valve guide? Im assuming from .001 to .003 range.

[Flyingw]

Page 6-8 of the service manual

http://www.oscarmayer.net/atc/manuals/

[barnett468]

hello;


unfortunately the service manual does not give you the new valve od., however, the guide takes a 5.5 mm reamer and new valve to guide clearance is around .001" intake and .0015" exhaust. service limit is .005" in and .006" ex.


http://www.oscarmayer.net/atc/manuals/honda/85-86_ATC350X_Service_Manual.pdf

[blkstangman88]

Sweet i got the guides out and new guides in. Reamers should be here tomorrow