1984 225 DX trailer hitch

[nhwheeler]

I want to make or buy a trailer hitch for small yard kart does any one know where I can buy one or have any plans or write ups on one ? Going on 84 tri moto 225 dx

[Motorgidd]

I was looking for one a while back and EBay is the only place I have ever seen them.

You could fab something up pretty easy and cheap with a piece of steel plate, a grinder and a drill press. :)

http://www.ebay.com/itm/Yamaha-225-DX-tri-moto-1984-rear-end-trailer-hitch-ball-I-have-more-parts-/221144408221?pt=Motors_ATV_Parts_Accessories&hash=item337d3be09d&vxp=mtr#ht_3121wt_662

http://www.ebay.com/itm/NOS-ATC-Trailer-Hitch-Mount-1984-Before-Yamaha-YTM225-DX-Shaft-2208-/120805809528?pt=Motorcycles_Parts_Accessories&hash=item1c20965d78&vxp=mtr#ht_566wt_662

[nhwheeler]

I have a buddy who is a welder fabricator just need some good pics and some dimensions and about $10.00 in steel want to do this on the cheap☺ :-D

[atctrike]

199871check this homemade set up out. 199870

[czac]

199871check this homemade set up out. 199870

nice... hows it work, ok? I was wanting to make something for mine as well but don't want it to be too obvious.

[Ghostv2]

I have a homemade one on one of mine. There wAs a NOS one on eBay a month back or so.

[atctrike]

seems to work just fine. I haven't had a trailer on it but you can stand on it with no problems. I'm just getting this bike put together, new post with pictures pending after I install a new throttle cable.

[jakep53]

ill post up mine tomorrow mines very beefy!!

[wide'n'low]

i have an original oem Yamaha trailer hitch spefically for the dx, with the upper support rods and all. I'd suppose I'd let it go, I've never used it.http://i307.photobucket.com/albums/nn298/ecosleeper/IMG_20140830_141217_736_zps0b03ce43.jpghttp://i307.photobucket.com/albums/nn298/ecosleeper/IMG_20140830_141223_143_zps46503983.jpghttp://i307.photobucket.com/albums/nn298/ecosleeper/IMG_20140830_141227_079_zps6f0ce80d.jpg

[muthey]

I have an oem hitch on mine, and it doesn't have the upper supports, I will take pics of it tomorrow, it does fit a regular sized ball though, have used it a few times to tow vehicles and logs.

[muthey]

here's some poor pics of mine almost forgot about taking them and it was dusk when I did. as you can see it attaches at the top and has a support bracket on the bottom, I talked to the original owner and he purchased the hitch from the yamaha dealership here. 200247200248200249

[czac]

i have an original oem Yamaha trailer hitch spefically for the dx, with the upper support rods and all. I'd suppose I'd let it go, I've never used it.

how much are you asking for it?