My on going project.

[mrtwidster1]

Been working on this awhile. I hope to get it done this year.:wondering

http://i544.photobucket.com/albums/hh331/mrtwidster1/e1a09730-9605-42ab-adb5-9e124861abd8_zps2cabb354.jpg (http://s544.photobucket.com/user/mrtwidster1/media/e1a09730-9605-42ab-adb5-9e124861abd8_zps2cabb354.jpg.html)

[NeverLift]

Looks great love the white, inverts and all the red anodized hardware.

[JasonB]

that bike is re-god-damned-diculous! nice work man, seriously sweet build. been watching this develop with the inverts especially. Whats 'left' to finish ?

[mrtwidster1]

Whats 'left' to finish ?
Thanks for the compliments!
Misc powder coating, anodizing, polishing ect. Still got to get the CR jug fitted for a new piston. May have some porting. Undecided on that. Need to install the 01 ignition. Still several small things. Working on the airbox now. Fabricated a TRX style.
My son has "Broke" the angles on the rear skid plate.When he ships it to me I will finish that. Still have to do some more fab work to the engine skid plate.
Would not take much to make this bike a runner like it is, but it would not be what I want. Still have to prep and base/clearcoat the tank. Still not decided on the pipe finish for the Jemco, May put the selvys on it. Not sure about a few things that go on this one. I have a lot of custom one off parts that was made for this project.
I am limited to my work environment so the progress is slow.

[mrtwidster1]

Pic of airbox "Roughed In" Still need to fab and install mounting hardware. Just mocked up now for fitment and then dis_assembled. Will polish or powder coat.
http://i544.photobucket.com/albums/hh331/mrtwidster1/airbox18_zpsf202e348.jpg (http://s544.photobucket.com/user/mrtwidster1/media/airbox18_zpsf202e348.jpg.html)


http://i544.photobucket.com/albums/hh331/mrtwidster1/New%20R%20build/Air%20Box/airbox26_zps326082e5.jpg (http://s544.photobucket.com/user/mrtwidster1/media/New%20R%20build/Air%20Box/airbox26_zps326082e5.jpg.html)

[Flyingw]

DANG TONY!!!!! Good Job Brother

[Dirtcrasher]

Nice, breathing on it's own!!

I just got a Milller TIG and so far, I'm terrible at it, :lol: (that was only 20 minutes though) I Hope to make you guys some nice stuff needed down the line......

[mrtwidster1]

Thanks Captain. Good to see your still out and about.

Thanks DC. Hope you are recovering well.

[mrtwidster1]

11 ga Stainless.
Still have to put come holes in it. Probably polish the underside and PC the top side.
http://i544.photobucket.com/albums/hh331/mrtwidster1/IMG-20131116-00127_zps55a17f64.jpg (http://s544.photobucket.com/user/mrtwidster1/media/IMG-20131116-00127_zps55a17f64.jpg.html)