Advice - Rims for '84 Honda 200s

[kmichels]

Bought pair of rims with 3/5 offset and found out my 200s had 4/4s on it. Wanted to know if I would be ok with putting the 3/5's on it or if I should send them back and get 4/4's instead. I don't do rough/intense riding just a little trail riding (cautious) and back road driving.

[86125m]

The offset wheels will be fine on the back of the bike. But will not work on the front. I know I learned it the hard way. Anyway nobody sells non offset wheels anymore, well not anybody I know of.

[kmichels]

Thanks for the response. I'll look into getting my treads put on soon then. I figured it wouldn't be that big of a deal but then as you said, i did some research and don't appear to be able to find centered rims, at least in the couple places I looked.

Also - to anybody that has read this thread and noticed two other threads just like it - I was not trying to be overly aggressive getting attention, my two original threads did not show up and I couldn't understand why. After I posted the third one, only the third one showed up. I only noticed today that the other two posts also completed successfully and I have since removed them.

[jb2wheels]

Here's a 4+4, 0 offset, with 4x130 bolt pattern. Should work on the front of a 200s:
http://www.powersportsplace.com/parts/dtg-010-01/overview/

[kmichels]

Here's a 4+4, 0 offset, with 4x130 bolt pattern. Should work on the front of a 200s:
http://www.powersportsplace.com/parts/dtg-010-01/overview/

thanks a bunch!