Log in

View Full Version : 85 200x rim swap


cwolfe
03-26-2014, 09:29 PM
hello everybody i wonder if anyone knows if a 86 350x rear rim will bolt on to a stock 85 200x. i need to buy a set for my new 200x because somebody put a set of yerfdog go cart rims and tires on it and it is not pretty and i found a set of 350x rims online and i wanted to know if i could use them. any input would be appreciated.
DohcBikes
03-27-2014, 10:31 AM
Yes they will bolt to your hubs. Both are 4x110

Keep in mind though that they are 9 inch rims.

Limited tire selection.
giggity
03-27-2014, 10:43 AM
Will the offset be the same though?
atc300r
03-27-2014, 11:20 AM
They wont bolt to the stock 200x hub. without longer studs. The rims have a thick steel insert for the tappered lug nuts.They are offset from the oem 200x. You can get 86-87 200x,250x,300ex,400ex rear hubs and the 350x rims will bolt right on.
86125m
03-27-2014, 12:56 PM
You can get brand new itp rims for your 200x that look veary stock and only cost 27 dollors a rim. They will work on the back but not the front thow. Go to rockymountainatv.com and order them to get them for 27 dolloes a peice.
DohcBikes
03-27-2014, 02:56 PM
^^^really?

Post a link?....
Mr. Clean
03-27-2014, 03:05 PM
Its not american dollars, its some other type of currency, and not one I am familiar with.


^^^really?

Post a link?....


27 dollors a rim. 27 dolloes a peice.
86125m
03-27-2014, 08:00 PM
Its not american dollars, its some other type of currency, and not one I am familiar with.

I'm sorry for the typo I was on my tablet and when I type on it I have lots of spelling errors. But that is in American dollars oh and here is the link to there site http://www.rockymountainatvmc.com/p/3376/8633/ITP-Steel-Wheel?v=1901. I run these on the rear of my 86 125m and they look and sit right but because of the offset it will not mount on the front. the link is the rims for your 200x but make shore these are the ones for your bike before you buy them.
Birddog85
03-27-2014, 11:58 PM
They wont bolt to the stock 200x hub. without longer studs. The rims have a thick steel insert for the tappered lug nuts.They are offset from the oem 200x. You can get 86-87 200x,250x,300ex,400ex rear hubs and the 350x rims will bolt right on.

I have 350x rims on my 200x with 250r hubs.
Other than having to get the conical lugs there were no fitment issues. And my tail is a bit wider!
Mr. Clean
03-28-2014, 10:18 AM
What year 250r hubs?


I have 350x rims on my 200x with 250r hubs.
Other than having to get the conical lugs there were no fitment issues. And my tail is a bit wider!