JasonB needs another 10 inch wheel so here we go again!!!

[Xowner]

.160 custom spun wheel halves welded, They have no valve stem holes so you can put them where you need too!


the price 125 + 15 to ship!

http://i190.photobucket.com/albums/z119/Xowner350x/utf-8BSU1HMDA2MzctMjAxMTA2MTUtMTYxNC5qcGc.jpg

Here is one that was installed at TF and rode all week Itrike can confirm it!

http://i190.photobucket.com/albums/z119/Xowner350x/009.jpg
http://i190.photobucket.com/albums/z119/Xowner350x/008.jpg
http://i190.photobucket.com/albums/z119/Xowner350x/005.jpg
http://i190.photobucket.com/albums/z119/Xowner350x/006.jpg

Here is an unground 250r hub inside the wheel too!

http://i190.photobucket.com/albums/z119/Xowner350x/utf-8BSU1HMDA2MzEtMjAxMTA2MTUtMTQwMy5qcGc.jpg



These will fit the COOL 86-87 tecates Pictures for the tecates will be at the bottom

10 inch wheel on 85 200x with 86-7 200x front hub!


http://i190.photobucket.com/albums/z119/Xowner350x/frontwheelfitment200x1.jpg
http://i190.photobucket.com/albums/z119/Xowner350x/frontwheelfitment200x3.jpg
http://i190.photobucket.com/albums/z119/Xowner350x/frontwheelfitment200x2.jpg




OK lets clear this up!!!

1985-6 250r Clears the hub wont clear MOST caliper need to take 4mm off the 1st and last caliper fin

1985-6 350x Clears hub caliper bolt on deal

1986-7 200x WILL FIT!!

Also will fit 1st Gen 200x with hub swap from a 86-87 200x and small amount of grinding on the caliper!!!

1986-7 tecates clears hub and caliper with no problems

Will not fit the Tri-z with out putting honda forks and hond hub on your triz you need 86 tripples to do so! It wont fit with just changing the triz hub to a 250r one sorry i tryed!

[JasonB]

Alright everyone in the name of me building more ridiculous bikes and post whoring about them I'm going to need some supporters to buy some of these sexy trailprotrailprotrailprotrailprotrailpro wheels. I own two of them and am hurting for a third, but I can testify to the quality of these wheels and the veracity of the sellers character. These be sum sweet wheelzzzzzzzzzzz yo

[c_hustle]

Can you tell me how this works? Do you pay in full up front? Do you pay half now and pay the balance when rims are done ? And is there a tentative date to when rims would be available? Thanks for helping the new guy :)

[poolieZerUK]

Can you tell me how this works? Do you pay in full up front? Do you pay half now and pay the balance when rims are done ? And is there a tentative date to when rims would be available? Thanks for helping the new guy :)
.

Would have one of these, but need sent to UK.
Let me know what the score is as was going to re dril a sport blue 3+3 10 inch needed for 250R pcd hub.
Cheers

[Xowner]

Can you tell me how this works? Do you pay in full up front? Do you pay half now and pay the balance when rims are done ? And is there a tentative date to when rims would be available? Thanks for helping the new guy :)

I collect up front that way the wheels are paid for, When everyone is paid I order them and they take 2-5 weeks depending on how long the line is to get them made

[Xowner]

Would have one of these, but need sent to UK.
Let me know what the score is as was going to re dril a sport blue 3+3 10 inch needed for 250R pcd hub.
Cheers

Over seas shipping is no problem.

[Xowner]

Here is the list so far.

Jason B
c_hustle
poolieZerUK
hillman440
Bryan Ditch FB
Shane Wehner FB
Lyle Offman FB


IF I MISSED YOU SPEAK UP!!!

[Mr. Clean]

These wheels are sweet, I have ordered so many they now double as soup bowls!!


84 200x. 86 200x hub with no grinding required. Just have to use the 83-85 Axle and axle spacers. I have not installed new brake pads but when I do I only have to trim the caliper ever so slightly.

[3 Wheel Drive]

Do you have any pics with the 86 Tecate with this? Im interested in getting one, PM me with paypal info! Pics please.

[Xowner]

Jason B
c_hustle
poolieZerUK
hillman440 paid 2 wheels
Bryan Ditch FB
Shane Wehner FB
Lyle Offman FB
3 wheel drive paid

[Xowner]

Jason B Paid
c_hustle
poolieZerUK
hillman440 paid 2 wheels
Bryan Ditch FB
Shane Wehner FB
Lyle Offman FB
3 wheel drive paid
Honda Harry PAID
KASEY
Greg Huntley FB

[JasonB]

i may be buying another one, how long before you place this order?

[Xowner]

Jason B Paid
poolieZerUK PAID
hillman440 paid 2 wheels
Bryan Ditch FB PAID
Lyle Offman FB PAID
3 wheel drive paid
Honda Harry PAID
KASEY
Greg Huntley FB PAID
Matt FB

[tecaterob]

I'm in for 2.... Give me Paypal info..

I'm also looking for the 7in wheels you were getting for the 70's. do u still have them?

[tecaterob]

Do u have pics on T3?

[Xowner]

No pictures of the Tecates every guy I sell them too never post pictures.

As far as the 70 wheels i have none i have to order ten sets of those I kno you want a set and i got another guy wanting a set.

[New2Tri-Z]

As far as the 70 wheels i have none i have to order ten sets of those I kno you want a set and i got another guy wanting a set.

I would be in for a set of 70 wheels.

[JasonB]

70 wheels bra bra. dont make me pay double your asking price to that website for a set of their 70 wheels. DONT MAKE ME DO IT JOHN!

[Xowner]

Jason B Paid Shipped
poolieZerUK PAID PM'ed for shipping over the pond
hillman440 paid 2 wheels Shipped
Bryan Ditch FB PAID Shipped
Lyle Offman FB PAID Shipped
3 wheel drive paid Shipped
Honda Harry PAID Shipped
Greg Huntley FB PAID Shipped

wheels are ordered guys Hoping another week or so they will be here. Ill keep you guys updated

[tecaterob]

Am I too late for 2 of them??

[Xowner]

Talk to the place friday, Wheels are made going into polishing tomorrow and hopefully ship to me late this week!!!!

[Xowner]

Guys im shipping wheels out today and tomorrow.

[ONEBAD350X]

Hey Jason how is your foot healing up? I hope your recovery is going as well as it can! Take care

Kevin

[3 Wheel Drive]

.160 custom spun wheel halves welded, They have no valve stem holes so you can put them where you need too!


the price 125 + 15 to ship!

http://i190.photobucket.com/albums/z119/Xowner350x/utf-8BSU1HMDA2MzctMjAxMTA2MTUtMTYxNC5qcGc.jpg

Here is one that was installed at TF and rode all week Itrike can confirm it!

http://i190.photobucket.com/albums/z119/Xowner350x/009.jpg
http://i190.photobucket.com/albums/z119/Xowner350x/008.jpg
http://i190.photobucket.com/albums/z119/Xowner350x/005.jpg
http://i190.photobucket.com/albums/z119/Xowner350x/006.jpg

Here is an unground 250r hub inside the wheel too!

http://i190.photobucket.com/albums/z119/Xowner350x/utf-8BSU1HMDA2MzEtMjAxMTA2MTUtMTQwMy5qcGc.jpg



These will fit the COOL 86-87 tecates Pictures for the tecates will be at the bottom

10 inch wheel on 85 200x with 86-7 200x front hub!


http://i190.photobucket.com/albums/z119/Xowner350x/frontwheelfitment200x1.jpg
http://i190.photobucket.com/albums/z119/Xowner350x/frontwheelfitment200x3.jpg
http://i190.photobucket.com/albums/z119/Xowner350x/frontwheelfitment200x2.jpg




OK lets clear this up!!!

1985-6 250r Clears the hub wont clear MOST caliper need to take 4mm off the 1st and last caliper fin

1985-6 350x Clears hub caliper bolt on deal

1986-7 200x WILL FIT!!

Also will fit 1st Gen 200x with hub swap from a 86-87 200x and small amount of grinding on the caliper!!!

1986-7 tecates clears hub and caliper with no problems

Will not fit the Tri-z with out putting honda forks and hond hub on your triz you need 86 tripples to do so! It wont fit with just changing the triz hub to a 250r one sorry i tryed!


I got my wheel and tire yesterday, it fits on the 86 Tecate parts no problemo... Thanks for making this happen!!!

196128196129