View Full Version : Time to put on the decals???
350xorbust
05-11-2014, 01:28 PM
My new decals have arrived, and was just wondering what chemical would be the best to use on new Maier plastics, to clean/prep the plastic ,in order to facilitate good adhesion and long life? Thanx
atc007
05-11-2014, 01:40 PM
Plexus,and or alcohol for prep. LOTS of water for placing,then sun to dry.
jeswinehart
05-11-2014, 01:57 PM
Rubbing alcohol for prepping area to be mounted
350xorbust
05-11-2014, 04:20 PM
Cool thanx
blue27
05-11-2014, 04:47 PM
Alcohol to clean, then a mixture of water with a little dish soap to help to get them on and slide around. After they are on, if there is a top layer of tape, spray water, or the soap solution on the transfer tape and it will help to loosen it up. Do not remove until the decals are dry, about 15min.
http://www.3wheelerworld.com/showthread.php/128178-Best-way-to-apply-decals?highlight=decal+application
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.