Father daughter PW50 project

[Dave_D]

Picked up this PW50 for a couple hundred

http://img.photobucket.com/albums/v208/Dave_D/PW50/002715b13df530f11affccd84180c10a.jpg

It runs. Not the best though
Missing an air filter and kick start is not original
Needs a choke cable aswel. But otherwise complete

Going to strip it down and clean everything up. Wiring job can be tidied up and coil wire is all taped up. Probably just replace it

While it's apart going to power wash everything and paint it. White frame and pink plastics. Might try my hand at recovering the seat too

That's all for now. My daughter is 2 and a half right now. Hopefully have this thing done by the time she's 3

Dave

[Doink]

I've only seen left-side kickstarts on scooters. Easier to adult-start for smaller riders, I guess. Try PW50's and PW80's for parts. I know the air boxes are very similar as well as the fenders and running gear.

[86125m]

Is that a plastic seat pan because you can just buy a piece of vinyl and cover the seat with it but look at some videos on youtube first. I've done 3 seats now like this and got a better fit than any pre made cover.

[Dave_D]

I'll carry over some of the pasts from another board later today.
But I've ordered pink plastics avd it came with a new seat

Lots of updates will be posted when I get home today :)

[Dave_D]

The info might seem scattered but ill space it out. Copy and past from other posts

Not the best pic (screenshot from a video)
But here she is on a friends PW50

http://img.photobucket.com/albums/v208/Dave_D/PW50/F41C385A-7429-4904-96C6-74631F1E3324.png

Well I got the bike running better today was able to ride it around the block.

At dinner today I opened my mouth and told Hailey "you know all the yellow parts on your bike. I'm gunna buy you pink ones" her eyes lit right up and she yelled "PROMISE"
So these are ordered http://www.ebay.com/itm/140748188943
I also went ahead and ordered a proper air filter for it http://www.ebay.com/itm/181095758517

Here's us one one of the test rides
http://img.photobucket.com/albums/v208/Dave_D/PW50/5B60B627-43C7-4558-A6F8-61C88B890014.jpg

A video of same ride
http://emobmg.photobucket.com/albums/v208/Dave_D/PW50/th_C405E11A-DCCC-4DE8-A554-49BE7BF48B0B.jpg (http://smg.photobucket.com/albums/v208/Dave_D/PW50/?action=view&current=C405E11A-DCCC-4DE8-A554-49BE7BF48B0B.mp4)

Mods feel free to edit no helmets (frowned upon. I should know better too)


So as of right now aside from waiting I just need to replace choke cable (brothers got one for me)
And fix the rear brakes and it's basically done.

It will be getting somewhat torn down and frame painted pretty quick too

Thanks

Dave


Thanks :)

I placed a bid on these baby's
http://www.ebay.com/itm/331245838929

I'll find out in the morning if I've won them

Dave

[Dave_D]

I've won the decal kit so I think the bike should end up looking pretty sharp

[Dave_D]

Not much action here. But I'll keep the build updated as it's a simple copy paste from another board



Still waiting for the parts I ordered to come in.
But found a little time to work on this beast

Started taking the handle bars and wheels off

http://img.photobucket.com/albums/v208/Dave_D/PW50/4EF72E38-94CD-41AD-855D-6264EB8CCA24.jpg

The exhause has to come off to get rear wheel off

http://img.photobucket.com/albums/v208/Dave_D/PW50/028C76F3-42B1-45AF-BF19-EB321C801850.jpg

The items to be painted white

http://img.photobucket.com/albums/v208/Dave_D/PW50/DEC76B42-CB96-40D1-B42A-6F846F62648B_1.jpg

At this point as I said to the wife "I got a little carried away"

http://img.photobucket.com/albums/v208/Dave_D/PW50/B752AA22-72B9-43AE-BA70-8703B3DBD1F0.jpg

http://img.photobucket.com/albums/v208/Dave_D/PW50/7FB649A5-72C7-420F-A9BC-94AC942ABE08.jpg

http://img.photobucket.com/albums/v208/Dave_D/PW50/8F4E9F76-EA01-4E57-90DE-D0B8E3EDEE22.jpg


Soo yea at this point disassembly is basacly done.

I found 3 cracked welds that I will be fixing

http://img.photobucket.com/albums/v208/Dave_D/PW50/E73B87DA-4479-4233-9AB8-9186E61A4361.jpg

http://img.photobucket.com/albums/v208/Dave_D/PW50/FC780171-0531-46F9-9F57-AB8A16C1FCD9.jpg

http://img.photobucket.com/albums/v208/Dave_D/PW50/074FCC90-1706-475A-88B6-F0C24F4802B5.jpg


Being over 30 years old I'm not surprised to find some cracked welds. Just glad I found them now

Most of the rest of the bike will be painted black. Frame. Exhaust. Motor if it needs it. Front fork lowers. I'm not sure what to do with rear shock and springs yet. But that will come.

Front forks need rebuilt aswell and I think 1 side has a broken spring.

Anyways that's today's update

Dave

[Dave_D]

Excellent drive. Feels a little long on a couple of stretches. But lots to see

I made a little progress today
Aside from the 3 cracked welds this frame has been repaired before.

Peeled off a few wraps of electrical tape hidden under gas tank area and...

http://img.photobucket.com/albums/v208/Dave_D/PW50/4f0fdd8fe52e6ba6a94b6b5a9fe5f8e1.jpg

Got a little bit of the frame sanded. Go over it some more by hand and with a wire brush

http://img.photobucket.com/albums/v208/Dave_D/PW50/df5216cc9fa1aead0bf14828eaff0248.jpg

Got the handle bars completely sanded and ready for paint

http://img.photobucket.com/albums/v208/Dave_D/PW50/3f8187f47e39b8c74b7bd3d109681cd0.jpg

Tires came off the rims. I don't want over spray onto the tires. In my eyes this step needed to be done. And started at these with a wire brush. Probably sand by hand aswel
http://img.photobucket.com/albums/v208/Dave_D/PW50/acd705e87c96f57014d7f45095396506.jpg

Got home and started on the exhaust a little.
Using high temp tremclad here

Tail pipe
http://img.photobucket.com/albums/v208/Dave_D/PW50/7320ec266bd3febee389c3380ba158ab.jpg

Header pipe
http://img.photobucket.com/albums/v208/Dave_D/PW50/e9f83427e307e4cac3e05d8dc70c9420.jpg


I also came home to...

http://img.photobucket.com/albums/v208/Dave_D/PW50/d0725388200cc044d70f7af2eb95286c.jpg

The air filter came in. It's a chinesse knock off. But the quality is super nice

http://img.photobucket.com/albums/v208/Dave_D/PW50/8f26bede374016139ddc92a194209165.jpg

http://img.photobucket.com/albums/v208/Dave_D/PW50/07eb166844ef25e183e9ed21491e11f0.jpg


Progress might pick up here for the next little bit :) aside from the weekend
Me and the wife have no kid this weekend and I've been told no working on haileys bike lol.
We are planning on going for a ride so I'm not complaining.

I tracked the plastics and they should be here in the next day or two.
Decal kit is still in Miami and not making much progress lol

Stand by for more updates

Dave

[Dave_D]

Dident think I'd be posting progress this often but here's what happened today.

I painted the handle bars

http://img.photobucket.com/albums/v208/Dave_D/PW50/1ec26d7905b5f08a33a4fc546de4dbed.jpg

Got the first coats on the wheels

http://img.photobucket.com/albums/v208/Dave_D/PW50/06c6c1e7e24cd4c52163749a3e62e9c2.jpg

I welded the frame. Did a ton more with wire brush and sanding by hand. And got the first couple coats on

http://img.photobucket.com/albums/v208/Dave_D/PW50/cd5151e78c414fdf7fcdc128dd9cbdab.jpg

I've been working on this during work at breaks lately
I got home from work today to an even bigger box with my name on it

http://img.photobucket.com/albums/v208/Dave_D/PW50/0cfd05191100b3809619a7ce2ddbd339.jpg

Plastics made it :)
Decal kit is in canada now

http://img.photobucket.com/albums/v208/Dave_D/PW50/94268053bdcf12f8951b30725d8df5ae.jpg

I'm really liking the way the exhaust turned out. Most of it is covered by the plastics. But decided to paint it all

http://img.photobucket.com/albums/v208/Dave_D/PW50/8a8670394b12bacccb134cd412d6b16d.jpg


I sprayed the motor with degreaser and let it soak a bit. Hit it with the hose and I'm happy with how clean it was. Accept one part

http://img.photobucket.com/albums/v208/Dave_D/PW50/4d4860855bc86f9b22349809427ea38f.jpg

I had to put at least one coat of paint on the cylinder and head. Tremclad high temp again.

http://img.photobucket.com/albums/v208/Dave_D/PW50/34c71ae0db4803d1a47b277ee9a4318d.jpg

That's all for now. There might be an update tomarrow. But it will probably only be the frame and wheels. Hopping to Finnish painting them tomarrow.

I also took the auto oiler off today and removed the gear. Noticeable drag turning the pump. Not required anyways. Oil tank missing ect. Planning to just run premix.

Dave

[ironchop]

those fenders, tank , and seat are adorable.

nice work, cute kid.

[Dave_D]

Finished painting the frame and wheels today

http://img.photobucket.com/albums/v208/Dave_D/PW50/61c20ba584da76629b121790caafc0ab.jpg

http://img.photobucket.com/albums/v208/Dave_D/PW50/22d2c3e80ba128023e56c87ab1829b48.jpg

Mounted the tires
I think the wheels look way better white

http://img.photobucket.com/albums/v208/Dave_D/PW50/a400a74e9674c7e657d303186b2cb552.jpg

Got home and had a little time to do some assembly
Installed the engine

http://img.photobucket.com/albums/v208/Dave_D/PW50/8d53a4f06390be032f640ac8e6539429.jpg

Handle bars. Forks. Wheels/tires installed

http://img.photobucket.com/albums/v208/Dave_D/PW50/0b684cf4cf19fd88da8edcedc4fa3e6e.jpg

Exhaust

http://img.photobucket.com/albums/v208/Dave_D/PW50/22a9dfaaf6770b932c870e7316b0af12.jpg

Still has a ways to go I did the wiring. Still needs to be tied out of the way better.
Slapped the old tank on and took it for a little ride

http://img.photobucket.com/albums/v208/Dave_D/PW50/458a72d1572ed73dfc34e8a3d9820a60.jpg

Brake cables still need to be done. And a few other things. Waiting to put plastics on till the decals are here. Maybe tomarrow or Friday

But this build might not get an update for a few days now

Thanks

Dave

[Dave_D]

No updates on the bike.

But I bought her a balance bike aka stryder
So she can start to learn her balance on 2 wheels
Has sent grasped the concept yet. Lifts her feet and expects it to go lol

http://img.photobucket.com/albums/v208/Dave_D/PW50/2b84bb43ebc8c58ce772397df2d35bdc.jpg

Dave

[Dave_D]

Got the plastics more or less installed today
Still needs tidying up.

Still needs a few other odds and ends but it's getting there.

I was going to wait till the graphics came to put plastics on. But I got impatient lol

http://img.photobucket.com/albums/v208/Dave_D/PW50/0a071fd1d4baa70b4aa5d88cdf50ff26.jpg

Dave

[SteveCZ28]

looks pretty good. ill be doing something similar with one of my 70's for my lil girl. i was thinking pink/white theme as well