Need a measurement. 85/86 Swingarm pivot.

[bkm]

I need the overall length of the pivot with all the hardware installed, ie. dust caps, the little sleeves the caps go onto.

I'm going to turn some delrin for some pivot bushings and I need the demisions with all this installed. I can figure out the rest.

[Red Rider]

Here ya go BKM. I don't have any calipers big enough, so the best measurement I could get was with a tape measure, but it's a Stanley tape measure, so you know it's accurate. It measured 9 3/16" from side to side.

[bkm]

Thank you. I got what I needed. Now I just need to order some delrin.