'86 200x Conversion E-START,REVERSE,AUTO CLUTCH

[Ol Deuce]

:crazy: Honda should have done this Back In The Day!!!!!!:D What I have done is Screwed up another Good Honda !!!Man I like this X
Any Way I started with a '86 200x chassis from Mr.Clean along with some other small parts I didn't have and It's all coming together as
Planned! I used a '87 200sx engine and lots of small parts from the Quad! :D The quads are great parts Machines :rolleyes: and so far
I'm very Happy the way this is all working out....So Far I haven't wasted any "Money":Bounce:Bounce:Bounce This is going to be my Build
thread so we will see!!!!

[Ol Deuce]

I tried to post pictures earlier but wouldn't respond

197268197269197270197271197272

[emmie357]

Looks like the engine bolted right in with a few spacers added?

[ironchop]

Subscribed!!! This gives me a spectacular idea!

I just bought a 250X a couple months ago missing all its wheels, axle, and brakes. Plastic and seat are in ruin....motor is tight, good compression, they had butchered up the wiring on the motor after installing a cam as the story goes and it had no spark. I found the reverse switch wiring was cut up and I believe they have an ignition interlock so that it cannot be started in reverse? Anyway, he kept robbing parts off it for his other quads after he pushed it to the back of the garage until it was in the shape I found it and snatched it up for parts really. I was going to build my wife a decent 250X quad but would rather have a trike.

I know where there are a couple late model 200X rolling chassis at near me that would love to get back on the trail.

anyway I paid 75$ for a motor and carb still bolted to its quad frame.

[DohcBikes]

Sweet project ol deuce! This is the only way I would consider having a second gen.

ironchop, I don't know if you care, but i dont think the 250x motors are of the same configuration as the 200sx. I've looked into making a 250x trike as well. If not the same, a trike frontend on the 250 frame might be a simpler route. Tell me if I'm wrong about your motor because if I am, I want one.

Being a bike builder, I'm sure you know that if the bike has a reverse indicator light, then it can be wired a couple ways to not start in reverse. Through the key, I'm not sure why, but it could be done. Same for neutral, or any other light indicated gear for that matter.

Definitely gonna be checking in on this build!!

[ironchop]

ironchop, I don't know if you care, but i dont think the 250x motors are of the same configuration as the 200sx. I've looked into making a 250x trike as well. If not the same, a trike frontend on the 250 frame might be a simpler route. Tell me if I'm wrong about your motor because if I am, I want one.

I went back a re-read the original post where he said 200SX....My dyslexic ass read it as 250X....It must be Freudian or something...my bad

[90guy]

Uh Oh another project! Looks good cant wait to see the end results!

[Ol Deuce]

Sweet project ol deuce! This is the only way I would consider having a second gen.

ironchop, I don't know if you care, but i dont think the 250x motors are of the same configuration as the 200sx. I've looked into making a 250x trike as well. If not the same, a trike frontend on the 250 frame might be a simpler route. Tell me if I'm wrong about your motor because if I am, I want one.

Being a bike builder, I'm sure you know that if the bike has a reverse indicator light, then it can be wired a couple ways to not start in reverse. Through the key,

I'm not sure why, but it could be done. Same for neutral, or any other light indicated gear for that matter.


Definitely gonna be checking in on this build!!

the 250 TRX sport Quad is Manuel, chain drive! All this is about having enough room in the chassis for the engine swap.the 2nd gen "R" chassis would be the frame to use!!!! I really don't want to cut frame tubes unless the engine is really Special! Lots of fun!!:Bounce:Bounce:Bounce

[Ol Deuce]

And I have 2 more little projects in line just waiting Damn-it.......

[Ol Deuce]

:Bounce:Bounce:Bounce:rolleyes: More Photos

197287197288197289197290197291197292

:cool:

Ol Deuce

[Ol Deuce]

Damn More Photos!:crazy::crazy::Bounce:Bounce:Bounce:Bounce

197293197294197295197296197297

WoW:wondering still got more LoL

[Ol Deuce]

;):rolleyes: yup a few more:cool:197299197300197301197302197303

:wondering I still have more:D

[the great gazoo]

Holy shyte, you've blown my mind AGAIN! This is so cool, and I really like the black forks & booties. Are you keeping them black, or do you have different plans?
I've said it once but I must say it again- you really keep it interesting 'round here.

[Ol Deuce]

:D each photo is worth a 1000 words .......:Bounce;)

197304197305197306197307197308197309

:wondering

[Ol Deuce]

Holy shyte, you've blown my mind AGAIN! This is so cool, and I really like the black forks & booties. Are you keeping them black, or do you have different plans?
I've said it once but I must say it again- you really keep it interesting 'round here.

Yes!!! Thanks when ya see the seat cover ! ''IT's The Way I Got It" LoL

[Ol Deuce]

Holy POOP More pictures ...:crazy:197310197311197311197312197313

:Bounce:Bounce well THIS IS IT FOR AWHILE :rolleyes:

Ol Deuce

[Ol Deuce]

This is yesterdays doings:rolleyes:

197315197316197317197318197319

:cool::Bounce

[Ol Deuce]

I did to much yesterday:cry: my back hurts ;)


197320197321197322197323

Well the next bit of this project is getting the battery box fastened using some Nutserts! Get a battery in and give it a try!! Oh Ya Put my "Trail
Pro tires" on the Rear;) :Bounce:Bounce:Bounce

[DohcBikes]

Lookin good.... Please tell me the seat is staying like that.

[Ol Deuce]

Lookin good.... Please tell me the seat is staying like that.

Oh oh you would have a blistered tosh with a ride on the trail LoL or it would ball up in the crack tehehehe

Ol Deuce

[Ol Deuce]

Mr.Clean and I had a conversation about that seat :Bounce:Bounce He thought the material came off an "Old Couch" & I think it was part of
the back seat of a '64 Impala !!!!!:D:D:Bounce:Bounce:Bounce


Ol Deuce

[DohcBikes]

Mr.Clean and I had a conversation about that seat :Bounce:Bounce He thought the material came off an "Old Couch" & I think it was part of
the back seat of a '64 Impala !!!!!:D:D:Bounce:Bounce:Bounce


Ol Deucewhich, for the most part, are one in the same.

Sarcasm. Just another service I offer...;)

[the great gazoo]

I'm kinda hoping for a black seat cover, the '83-'84 200X color scheme would look so trick.

[Ol Deuce]

I'm kinda hoping for a black seat cover, the '83-'84 200X color scheme would look so trick.

That is the plan with this project......! 1st gen appearance with 2nd gen ride!!!!!

[jeswinehart]

This a very interesting conversion for me. I dearly love my 85 Bigred but my back don't so this conversion sounds like the best of both worlds to me.
I never did have much luck with the 83,84,85 200X motor wise for some reason but sure did like the suspension ~ perfect for me. Got along very well with the 350X's I have had over the years too ~ great stock suspension for me.
From what I been reading about the dry weight of the 200SX is 478 lbs.
250 BigRed @ 413 lbs.
1986 200X @ 278 lbs.
Alright Ol Deuce, looking GREAT + looking forward to more progress pics and a ride report !

john

[Dirtcrasher]

I'm so glad you stepped up!!

A few brave souls have had half-heartedly attempts before and said it would be too much work involved, :lol:

I'm not afraid of some hard/creative work and neither are you it seems :beer

[Ol Deuce]

I'm so glad you stepped up!!

A few brave souls have had half-heartedly attempts before and said it would be too much work involved, :lol:

I'm not afraid of some hard/creative work and neither are you it seems :beer

Hahaha....This Ol'soul got the Job Done!!! I usually build these things in my head four or five times before I start the first cut!!!!
and on this project it really did very well!

Sad to say , But My "X" has a Key!:Bounce:Bounce:Bounce


Ol Deuce;)

[Ol Deuce]

My Super "X" is totally Wired, front fender Mounted, The "DASH" with a "KEY":crazy: :Bounce:Bounce:Bounce is
all installed Breaks ,Mount the Battery under the seat ,go for a test ride!!:Bounce:Bounce:Bounce197454197455

Ol Deuce

[Ol Deuce]

:D
This a very interesting conversion for me. I dearly love my 85 Bigred but my back don't so this conversion sounds like the best of both worlds to me.
I never did have much luck with the 83,84,85 200X motor wise for some reason but sure did like the suspension ~ perfect for me. Got along very well with the 350X's I have had over the years too ~ great stock suspension for me.
From what I been reading about the dry weight of the 200SX is 478 lbs.
250 BigRed @ 413 lbs.
1986 200X @ 278 lbs.
Alright Ol Deuce, looking GREAT + looking forward to more progress pics and a ride report !

john

Thanks John The Ride Report is the part I'm Really looking forward to>>>>>>>>>:D

[Ol Deuce]

But the battery is and she Came Alive...........I'm Liking it a lot:Bounce:Bounce:cool:

[the great gazoo]

What's going on with the seat, Mr. OD? has anyone(ANYONE) offered up a black seat cover? Also I was wondering about the fork legs- Are they 1st gen in 2nd gen triples(did you mention this earlier & I missed it cos I was looking at the photos)?

[Ol Deuce]

I must have done something right in the wiring! LoL She fired off the first try:Bounce:Bounce:Bounce:Bounce:Bounce:Bounce:Boun ce:Bounce:Bounce
:cool::D:crazy::crazy::crazy::crazy::crazy::crazy:

Ol Deuce

[Ol Deuce]

it's a bad one LoL:crazy:


https://www.youtube.com/watch?feature=player_detailpage&v=1tFH-aJANcg&list=UUGleP4TjrOH1BpmAg2RpNQg

https://www.youtube.com/watch?v=1tFH-aJANcg&list=UUGleP4TjrOH1BpmAg2RpNQg

[jeswinehart]

Nice. I even seen the backfire from the header reflecting off the top of the swing arm pivot area ~ cool.

Ol Duece, can you name off some of the Quad parts you used on this build please ?

Thanks, john

[Ol Deuce]

Nice. I even seen the backfire from the header reflecting off the top of the swing arm pivot area ~ cool.

Ol Duece, can you name off some of the Quad parts you used on this build please ?

Thanks, john

I used from this '87 200sx "QUAD" Hahaha....... 1.Engine
2.the total complete harness
3.the left hand control switch
4.Left hand Brake/Reverse cables and hand lever
5.the complete battery box
6.The Cobra Exhaust system.....
7. lots of the fasteners /junk of the Quad
8. Back wheels & tires
.................................................. .................................................. .................................................. ..........................................
1a.Extras to the '86 200sx
2b. 1984 250r rear axle
3c.hubs from 1st gen 200x
4d. 1st gen 200x forks
5e. 1st gen top tree clamp
.................................................. .................................................. .................................................. ...............................................

the rest of the parts are the '86 200x ......................Ol Deuce:crazy:

[250r kid]

What's going on with the seat, Mr. OD? has anyone(ANYONE) offered up a black seat cover?
HEY OLDeuce i can help you out with a custom seat cover if your interested ? shot me a PM we can talk about it ..

[Ol Deuce]

:D Got the new rear fender this morning :Bounce It sure is "Red" :w00t: LoL Ol Deuce

[the great gazoo]

What's up with the seat, Randy?

[Ol Deuce]

Well something is going to happen very SOON! :crazy::D............I have to see what she looks like out side and in the weeds!!!!!




What's up with the seat, Randy?

[Ol Deuce]

Last night I did some fitting on the rear fender...close Hmmm..............197799

[Ol Deuce]

Well she is on the ground! Running but in need of parts......Brakes:eek::wondering Ol Deuce

[Ol Deuce]

Thanks Donny!!:Bounce:Bounce It's getting close for a ride report!!! Ol Deuce





Roy you build some nice one off trikes.

[Ol Deuce]

The Battery box mounted well and the chain fit Better than Perfect

198313198314

[manbearpig]

Lookin awesome buddy!!

[Dirtcrasher]

Is that a small "pop" on deceleration?

If the airscrew is about 1.5 turned out (and has screw/spring/washer/o-ring), your pilot jet should be AOK. Header leaks do this as well.

My X use to do that and just a 1/4 turn out of the fuel screw took care of it....

Just my thoughts but you get huge props for someone getting this done and it looks relatively easy. It must be your brain and the parts you had because the other guys couldn't get it done. GREAT WORK!!!!!!!

[JustEnough]

Saw some exhaust blowing by the front of the engine in the video. Maybe it needs a copper exhaust washer between the header and head.

[Ol Deuce]

What is going on is the header pipe is not square to the gasket "Fresh Air In"........I hope the smoke issue will go away with the new seal! Time will tell !! She is a Super Fast STARTER!!! I HOPE NOTHING IS REALL WRONG INSIDE:rolleyes::crazy:

[Dirtcrasher]

I've had pipes that do this because every bend,length and mounting isn't perfect in every application.

I heat them up with oxy/acet and bang them around with a big rubber mallet (with my boot), to set it into where IT WANTS to go to seal up correctly......

[Ol Deuce]

I've had pipes that do this because every bend,length and mounting isn't perfect in every application.

I heat them up with oxy/acet and bang them around with a big rubber mallet (with my boot), to set it into where IT WANTS to go to seal up correctly......

On this pipe I'm going to cut off the last 9'' of the pipe and flip it 180 and re-weld !! this will move the pipe out and around the frame! it's a huge pipe ! this should work:Bounce:Bounce

[Ol Deuce]

I took this "X" for a brief ride down the drive and back:D:D she is going todo well :Bounce:Bounce:Bounce

[Ol Deuce]

still a bit to soon for a full ride report ! but Reverse is way cool :D



200599 http://i230.photobucket.com/albums/ee143/OlDeuce/IMG_0729assz_zpsb7e9e38e.jpg (http://s230.photobucket.com/user/OlDeuce/media/IMG_0729assz_zpsb7e9e38e.jpg.html)

[Ol Deuce]

:Bounce:Bounce201574201575201576

A friend gave me a pr. of 350x scoops a few years ago they were cracked but workable,,, and they found a new home ...just a few little mods and they did good!!!:crazy:

[Dirtcrasher]

I am absolutely amazed that this is a relatively easy swap ( No discredit to your work though!! )

At LEAST 3 guys said, "It cannot fit, it will not work etc etc" and I figured they knew what was up.

But here's to you that didn't probably even read those posts and got it done!! What a fine lightweight 86 200X you have now in the same family as the 250SX which is quite a bit heavier......

WELL DONE!!!!!

[6speedthumper]

I had an 86 200sx. GREAT little bike! Sat for years with water in the engine before I got it. Still ran like a Honda after a couple oil changes. Super cool little build, Duece!!!

[408Fairmont]

Good job dude, looks awesome.


I trailprotrailprotrailprotrailprotrailprotrailprotr ailpro love that seat man, if you get an original seat, I'll buy that one from yea.

[DohcBikes]

I am absolutely amazed that this is a relatively easy swap ( No discredit to your work though!! )

At LEAST 3 guys said, "It cannot fit, it will not work etc etc" and I figured they knew what was up.

But here's to you that didn't probably even read those posts and got it done!! What a fine lightweight 86 200X you have now in the same family as the 250SX which is quite a bit heavier......

WELL DONE!!!!!
Some guys just have a way of making it look easy. Ol deuce is obviously one of us.:D

Fantastic result.

[Ol Deuce]

Some guys just have a way of making it look easy. Ol deuce is obviously one of us.:D

Fantastic result.

Thanks !!!! This is what I love todo:Bounce

203963

[kazander]

nice job and a well built trike

[Ol Deuce]

nice job and a well built trike

Thanks Man!!!!!

[Sxb3646]

Man this is awesome! Y'alls ingenuity is inspiring!

[Sxb3646]

Man y'all gonna have me tearing down my bikes! Trying stuff. Then ima have to bring en to the shop when I can't put em back together!!! Lol nice build man! I'd like to place an order of your taking them

[Ol Deuce]

Man y'all gonna have me tearing down my bikes! Trying stuff. Then ima have to bring en to the shop when I can't put em back together!!! Lol nice build man! I'd like to place an order of your taking them

Hahaha Finding the 200sx quad engine is the problem .................The rest is easy ! Now that you know how its done !! This makes a Fine SuperX !!!!! So far what little testing I've done She might be even cooler than the 250Sx! I have both!!!!!

[Ol Deuce]

:Bounce:BounceMy son sat down today and put the detail to my 200X decal
http://i230.photobucket.com/albums/ee143/OlDeuce/RandyMead_honda200superx_REAR-Copy_zps98709502.jpg (http://s230.photobucket.com/user/OlDeuce/media/RandyMead_honda200superx_REAR-Copy_zps98709502.jpg.html)

[Ol Deuce]

THIS IS FOR THE TOPS OF THE REAR FENDER
http://i230.photobucket.com/albums/ee143/OlDeuce/RandyMead_honda200superx_zps8df29ffc.jpg (http://s230.photobucket.com/user/OlDeuce/media/RandyMead_honda200superx_zps8df29ffc.jpg.html)

[torker]

She is screaming for a blue or black seat cover, that will match the incredible graphics your son has created. Your done...
Nothing against the current seat, I just think it will look better. Just my personal opinion.
You Sir, have done a great job and have me looking at the classifieds for a 200x and a 200 quad...

Maybe I can do similar with the TRI-Z rolling I have sitting outside... Hmmmm...

Enjoy.
TORKER.

[Ol Deuce]

Thanks Torker.........it still may end up with a different seat in the very end!!! I'm always playing on the LOOK!! she is a way Cool Ride for sure!!! Ol Deuce

[350XJEDI]

Nice build ,I want to build one now,,,lol
have the moter need a frame

[Ol Deuce]

Nice build ,I want to build one now,,,lol
have the moter need a frame

Manbearpig has a frame !!! Check with Paul ! He will take care of that little problem ! Ol Deuce

[350XJEDI]

Have to finish my 500 x first, have to many projects not enough time or $$

[Ol Deuce]

Have to finish my 500 x first, have to many projects not enough time or $$

Hahaha I Hear ya on the $$$$$$$$$$$$$$ Tons of time! just can't seem to get it all in the right order ....LoL

[Ol Deuce]

She is screaming for a blue or black seat cover, that will match the incredible graphics your son has created. Your done...
Nothing against the current seat, I just think it will look better. Just my personal opinion.
You Sir, have done a great job and have me looking at the classifieds for a 200x and a 200 quad...

Maybe I can do similar with the TRI-Z rolling I have sitting outside... Hmmmm...

Enjoy.
TORKER.
This is what it has for now LoL


207351

[Ol Deuce]

Been playing in my Photo shop 207374 :crazy:

[86125m]

Yea dido on the blue seat and that baby will look sweet.

[Jmoozy27]

I want one!!!!:naughty:

[Ol Deuce]

Just got the rear Grab Bar for this girl :D! to find a good took a bit of Looking and Paul came through with a perfect one !!! Thank you Paul !!! aka manbearpig:Bounce:Bounce:Bounce

[Jmoozy27]

This thread has totally motivated me, picked up an 88 200sx today. A good frame is my next step. Really looking forward to having something nice like yours Ol Deuce.

[Ol Deuce]

This thread has totally motivated me, picked up an 88 200sx today. A good frame is my next step. Really looking forward to having something nice like yours Ol Deuce.

Cool If I can help you in any way please let me know!

[taz]

this is really nice deuce I have had a 200sx engine sitting in a second gen frame for about 3 or 4 years just don't have all the trike parts to put it to getter this really makes me want to get it done
ps that is one nice looking x

[Ol Deuce]

this is really nice deuce I have had a 200sx engine sitting in a second gen frame for about 3 or 4 years just don't have all the trike parts to put it to getter this really makes me want to get it done
ps that is one nice looking x

Thanks for the kind words TAZ!!!!!!!!:D:Bounce:Bounce

[Ol Deuce]

Getting real close to a completion of this Project !! Today I replaced the Rear Shock I got from Mr.Clean !! What a Guy!! :Bounce:Bounce:Bounce

http://i230.photobucket.com/albums/ee143/OlDeuce/IMG_3438_zpsbff8c90d.jpg (http://s230.photobucket.com/user/OlDeuce/media/IMG_3438_zpsbff8c90d.jpg.html)

[Ol Deuce]

:crazy::crazy::Bounce:Bounce:D
http://i230.photobucket.com/albums/ee143/OlDeuce/IMG_3443_zps95cfd7f7.jpg (http://s230.photobucket.com/user/OlDeuce/media/IMG_3443_zps95cfd7f7.jpg.html)

[Ol Deuce]

:crazy::crazy::cool:
http://i230.photobucket.com/albums/ee143/OlDeuce/IMG_3444_zps97b1c871.jpg (http://s230.photobucket.com/user/OlDeuce/media/IMG_3444_zps97b1c871.jpg.html)

[Jmoozy27]

Looking good Deuce, if mine ends up looking half that good I will be satisfied. My frame will be a roller soon.

[Husky250]

That looks like a sweet build! I am now feeling totally self conscious about the 3 years it has taken me to get my 86 to a point of not running. Great job!

[Ol Deuce]

That looks like a sweet build! I am now feeling totally self conscious about the 3 years it has taken me to get my 86 to a point of not running. Great job!

Thanks Husky250!!

[Dave8338]

Gorgeous ! ! ! ! !

[Ol Deuce]

Gorgeous ! ! ! ! !
Thanks..........It was a fun build!!

[Ol Deuce]

My big Decals should be here next week:D;)

[Ol Deuce]

:Bounce:Bounce Got the air tube made and the K & N mounted !:crazy:

http://i230.photobucket.com/albums/ee143/OlDeuce/IMG_3466_zpse3a82b62.jpg (http://s230.photobucket.com/user/OlDeuce/media/IMG_3466_zpse3a82b62.jpg.html)

[Ol Deuce]

Side shot !
http://i230.photobucket.com/albums/ee143/OlDeuce/IMG_3472_zpsda94b8ca.jpg (http://s230.photobucket.com/user/OlDeuce/media/IMG_3472_zpsda94b8ca.jpg.html)

[Ol Deuce]

Today was unbelievable,The day was over 68 with a breeze,a perfect day for a ride Report !:crazy:! I wasn't able to get in the hills but ! This superX Rides and Handles better than my '85Sx!:Bounce yes better!:cool: the overall power is close to equal only because of the gearing
of the SuperX .The large sprocket is a 42T over the stock 38T ! the '86 x is lighter and more agile than the 250sx ! the rear supenison of the '86 200x is mind blowing ...LoL....... WoW !!!:crazy::D

http://i230.photobucket.com/albums/ee143/OlDeuce/IMG_1410_zpsee87cb48.jpg (http://s230.photobucket.com/user/OlDeuce/media/IMG_1410_zpsee87cb48.jpg.html) :Bounce:Bounce

[Jmoozy27]

If she rides as good as she looks then that sounds like a winner. Awesome build.:beer

[Dave8338]

Well......... it IS almost Valentines Day, Have Ye a n"new" Sweet Heart" ? ;)


Sounds and looks like a winner ! ! ! !

[Ol Deuce]

Lights next !:crazy::Bounce:Bounce

[Jmoozy27]

An 85 sx light would be a good choice. Expensive though.

210301

I find that they look good on a 2nd gen front

[thcowboy]

Thats darn cool. I wish i had something with suspension. (except for mine and my freind big reds with an inch of it up front)

[Ol Deuce]

:cool: She is looking better:Bounce:Bounce
http://i230.photobucket.com/albums/ee143/OlDeuce/IMG_3474_zps4407d0bd.jpg (http://s230.photobucket.com/user/OlDeuce/media/IMG_3474_zps4407d0bd.jpg.html)
http://i230.photobucket.com/albums/ee143/OlDeuce/IMG_3475_zps13584bb9.jpg (http://s230.photobucket.com/user/OlDeuce/media/IMG_3475_zps13584bb9.jpg.html)
http://i230.photobucket.com/albums/ee143/OlDeuce/IMG_3476_zps5e8d5213.jpg (http://s230.photobucket.com/user/OlDeuce/media/IMG_3476_zps5e8d5213.jpg.html)
:crazy::crazy::Bounce:Bounce:Bounce

[Ol Deuce]

Bought a new aftermarket headlight cover '86 250r looks good210658 its not a good picture after the storm goes away I'll get a better shot !!

[Ol Deuce]

Found the bulb & holder today ! and got bored so I did a photoshop to my ride LoL
http://i230.photobucket.com/albums/ee143/OlDeuce/IMG_1410copy_edited-1_zps308a1c63.jpg (http://s230.photobucket.com/user/OlDeuce/media/IMG_1410copy_edited-1_zps308a1c63.jpg.html)

To much fun!!! Ol Deuce

[Ol Deuce]

This photo was this afternoon

[Ol Deuce]

Ok Now I got it!:crazy::crazy:
http://i230.photobucket.com/albums/ee143/OlDeuce/IMG_3496cas_zpsz4e9hipk.jpg (http://s230.photobucket.com/user/OlDeuce/media/IMG_3496cas_zpsz4e9hipk.jpg.html)

[Ol Deuce]

Cool Thing:Bounce:Bounce:BounceGot this Ol'Girl inspected this afternoon! :D We are ready for plates/off road tags:cool::cool:

[Jmoozy27]

Nice!!! One day I will ride one legally. Just gotta find my loophole.

[Ol Deuce]

Nice!!! One day I will ride one legally. Just gotta find my loophole.

You will:D when the Cop came into the shop he didn't understand what he was looking at!:crazy:!! LoL;):cool: I told him only one needed his Kindness LoL:drool::drool::drool::rolleyes: he had fun!!

[Ol Deuce]

still waiting on my plate to come in the mail !!!!!!! Damn they are slow!:D:Bounce:Bounce:Bounce:beermymint87 Tehehehe

[Ol Deuce]

I didn't finish the thread LoL..:wondering.. Got my personal plate for the superX :Bounce:Bounce The plate said......DEUCE.....:p:rolleyes: Hahaha happy camper

Ol Deuce

[Ol Deuce]

http://www.3wheelerworld.com/showthread.php/173095-ATC-200sx

This is Jasons build and I need to find the Green& White 200SuperX :-)

Ol Deuce

[Ol Deuce]

this is shep1970 His green framed build!! way Cool stuff

http://www.3wheelerworld.com/showthread.php/180723-Green-framed-1986-honda-200x-sx


Ol Deuce

[captainweezy]

Bump for redsox!

[Ol Deuce]

Bump for redsox!

Thats a Great Bumb!!! The superX is a Fantastic 200x !!!:Bounce:Bounce!!!:acr

[Ol Deuce]

Is anyone else thinking of building one of these cool X's Ol Deuce

[Merge_88]

Is anyone else thinking of building one of these cool X's Ol Deuce



Yep Ol Deuce, I've been thinking about it A LOT! Ever since I had the privilege of checking out the shep1970 Super X at Trikefest, I've been eyeballing my son's clean 86' 200SX! My favorite trike of all mine to ride daily is the 250SX followed by my 86' 200X...........so I can only imagine a Super X is the best of both worlds! I'm going to start looking for the right 86/87 rolling chassis to build and have it ready when my son outgrows the SX!

244749244750