86 200x rear axke swap with 84 250r axle..

[BiGDawG]

I searched and found that that will work but will the 86 200x sprocket fit the 250r axle and can i still use 86 200x axle bearings? or do i order 84 250r bearings.

[pipeline triker]

You need the 250R sprocket, Bearings are the 200x, it will slide in the carrier, You need to use one 200x seal and the sprocket side 250r seal I beleive. Do a search it has been described indepth before.

[Dirtcrasher]

I did it before, I think the seal size changed but not the bearings. I thought I used the 250R sprocket as well.

Search Google for " 3wheelerworld forums 20 day build " and in the last few pages I was using 85 200X axles, 84 250R axles etc etc and I told everyone how they fit but there are other options. I just know what worked for me. I ran that brake rotor hub because RMATV had a closeout on SS rotors for short $$ and I had bought about 6 of them......

[BiGDawG]

alright thanks from what i was reading i was confused on the bearings and the sprocket cause a few of the post said the 250r sprocket was 2 large and you needed to find a 38t

[Ol Deuce]

I just did this swap I used the 2gen r axle and the 42T sprocket It all worked out well! Just need to find the '86 rear caliper bracket
199298