PDA

View Full Version : 1980 Honda ATC Coil Wire



HamptonT
11-01-2014, 11:32 AM
This might be elementary to some of you folks but I need a little help. The coil wire pulled out of the coil on my 1980 ATC 185. All that's left on the coil is a threaded stud. Can I just screw the wire back on to the stud? Do I need a new coil? Thanks

wpginterceptor
11-01-2014, 11:58 AM
nope, just screw it back in... use some dielectric grease if you have some also!

JustEnough
11-04-2014, 01:49 PM
Might be best to cut a quarter inch off the end if the wire to make sure there is a good electrical connection and that it is tight. It may have come off because it had worn loose.