trikeguy2014
11-08-2014, 06:43 PM
Looking for guesses or opinions I know carb jetting can be tricky
So my 85 R is cutting out at 1/4 throttle. Push it past it clears up and runs great. Basically just cruising in 2nd 3rd it cuts out at 1/4 throttle. I have tried moving needle clip and that didnt clear it up so I am down to slow jet or could it be float height. It's defiantly a little rich at idle and 1/4 because of filing a plug every now and then. I have rode it like this for awhile and just wanting to get it right.
Should I try some smaller slow jets it has a 52 still in the OEM round carb
Any opinions would be great
So my 85 R is cutting out at 1/4 throttle. Push it past it clears up and runs great. Basically just cruising in 2nd 3rd it cuts out at 1/4 throttle. I have tried moving needle clip and that didnt clear it up so I am down to slow jet or could it be float height. It's defiantly a little rich at idle and 1/4 because of filing a plug every now and then. I have rode it like this for awhile and just wanting to get it right.
Should I try some smaller slow jets it has a 52 still in the OEM round carb
Any opinions would be great