Bigred neutral switch bypass....

[dustrunner]

MY 85 250ES NEUTRAL SWITCH IS MESSED UP...I TRIED UNHOOKING THE 4 WIRES COMING FROM THE RIGHT SIDE OF THE ENGINE TO BYPASS IT BUT NO LUCK .... AANY IDEAS ? :wondering

[Jmoozy27]

You say messed up, what are the symptoms?

[Flyingw]

4 wires????? Neutral is only one wire and it gets a ground when the tranny is in neutral. To bypass, all you have to do is ground that neutral wire. That enables the starter solenoid and turns on the neutral light.

[dustrunner]

when in neutral most of the time it wont get spark cause it thinks its still in gear..i don't have any dash light so I guess I need to figure out what color wire is the neutral wire.

[Jmoozy27]

Damn, I was just fooling with that the other day and cannot remember the color. I want to say black with a green stripe but I am not certain. I am pretty sure that the diagram is in the manual all the way in the back.

[Gearheadtom]

It should be a two wire plug, one wire red, one wire green. Jump the green wire to ground.