hawaiirider
01-07-2015, 05:43 PM
hi i have a common mikuni flatlslide 28mm carb on my 200x, it runs great with it, increased power overall a bit. problem is it bogs on whoops, big jump landings and after long wheelies. is the pc racing vent system the way to go? i saw a boysen super bowl in some magazine i think too. any options out there that work.
also my jetting looks correct on the plug, runs good just hesitates on the 1/4 throttle transfer from pilot jet to the needle. ive adjusted the needle up and down but mid postion works best (least bog on transition) should i try replacing the pilot jet? i dont have much experience other than the main jet for top end, which is fine on it
thanks!
also my jetting looks correct on the plug, runs good just hesitates on the 1/4 throttle transfer from pilot jet to the needle. ive adjusted the needle up and down but mid postion works best (least bog on transition) should i try replacing the pilot jet? i dont have much experience other than the main jet for top end, which is fine on it
thanks!