Big Red 250es broken fork stud

[BigFrednR]

Ugh! I was on a roll throwing on my newly acquired wheels and tires. I was tightening up the nuts for the fork cap and SNAP! I broke one of the studs.

Where would I look to find a stud or good replacement?

The Big Red received 12" ITP steelies with 26" ITP Mud Lite XL tires. It's still no match for the 18" of snow we have but far better than the turf tamers that came off.211609

[BigFrednR]

Still haven't found anything.

Someone have any suggestions?

[Dirtcrasher]

I'm sure you can match something up. Or, go to McMaster, buy a fully threaded SS bolt and cut to size.

Did you get the old one out??

[Chopsaw]

I have some I saved in case someone needed some . Let me find them

[Troyg25]

I have a tank and swing arm off a 350x im not using pm sent

[BigFrednR]

I have some I saved in case someone needed some . Let me find them

Excellent! Thank you

[86125m]

25
BOLT, STUD (6X25)

I was thinking these from a 200m would work here is the part number 92900-06025-0E there only like 70 cents so it would be worth a shot, I'm almost willing to bet these are the same studs. here is the link to the diagram it is number 25 on here http://www.partzilla.com/parts/search/Honda/ATV/1985/ATC200M+A/FRONT+FORK/parts.html

[Chopsaw]

Pulled them out of the tube today . Need to chase the threads . Not sure what it cost to send it to you , but send me your mailing address if you're interested its yours for the price of the ride .

Chop

[BigFrednR]

Chop came up big with the fork stud! Thanks a lot, Chop!

I like whoreing out Big Fred so here's a better picture with the rims and tires.212032