87 KX500 piston kits?

[big specht]

Where can I get one or what piston will work in these engines ? They sell them for the 88 and up 500s but not for the older 500s

[oldskool83]

you will not find pistons anymore for these years...no one wanted anything to do with 87 KX's. 85-86 your ok and 88-04 your ok also. If i were you and it was mine I would put it on CL and let someone else find out this hard truth. If not you just will own a paper weight now.

Everything 1987 motor related is gone everyware. Your OEM part no for piston is: 13001-1245 and there are non on ebay either. Sell the sucker off quick!

[onformula1]

Where can I get one or what piston will work in these engines ? They sell them for the 88 and up 500s but not for the older 500s

If I remember correctly and it's been along time you can use the 1988 and up piston, the difference is they changed from a one ring to a two ring piston. The rods were the same size from 1985 and up along with the wrist pin and bearing.

I would give Wiseco tech a call and see if my memory is correct.

[big specht]

you will not find pistons anymore for these years...no one wanted anything to do with 87 KX's. 85-86 your ok and 88-04 your ok also. If i were you and it was mine I would put it on CL and let someone else find out this hard truth. If not you just will own a paper weight now.

Everything 1987 motor related is gone everyware. Your OEM part no for piston is: 13001-1245 and there are non on ebay either. Sell the sucker off quick!
What is 87 only ? From what I seen so far Pistons and jugs power valves are what is hard to find

[Maico]

If I remember correctly and it's been along time you can use the 1988 and up piston, the difference is they changed from a one ring to a two ring piston. The rods were the same size from 1985 and up along with the wrist pin and bearing.

I would give Wiseco tech a call and see if my memory is correct.

This is correct. :)