Just bought a 200 ytm

[zRxsix3]

Hey guys been a while since i have posted but tonight i picked up an 84 YTM 200 shaft drive for 200 bucks, it needs some carb work but its all there and the starter works and lights once on a charger (battery needs charged/replaced) but i bought it as a winter project! Unfortunately it doesnt have reverse as i thought it would, trying to figure out if it is actually a 200... its shaft driven and has front and back shocks, electric start and has 200 plastics, it had both front and back racks but no reverse like a yamahauler, if anyone can shed some light it would be awesome!

[zRxsix3]

Also numbers on engine are 24W-001922

[zRxsix3]

Nvm about the rear suspension, it doesnt have that, that what i was confused on

[Aulbaugh]

The 85' s came with reverse. Post some pictures. See if your engine #'s and your frame numbers match.

[zRxsix3]

Will do if i can find where the frame # is, im looking for a carb for this thing and wondering if any other models would fit and work like the 225

[zRxsix3]

Anybody know what carbs i can put on my ytm 200e

[TwiZ]

Sweet find,esp if all it needs is carb work. Might be able to find a bolt on from something different or even adapt one. I pit a 200x carb on a suzuki quadrunner,i posted how i did it in new member area under thread lifan cdi on suzuki. Hope ya get it runnin those things are getting rarer than hens teeth

[zRxsix3]

thank you, i have seen carbs on ebay but they are wanting 90 bucks for one. might just break down and buy it, i also need to get a bearing for the rear end on the break side as it has play plus as i was tearing down the trike the wire broke off the coil so i will have to put a new one of those on after i get the broken bolt out of there that the previous owner left. other than that its getting all torn apart and repainted this winter as a project for the other half so she will have something to play around on, might do a build thread on it as i have pictures of the progress so far, pulling the engine soon and they the forks and then the prep work for paint... the hardest and most important lol