Need help ID'ing these parts to order.

[jrooster]

I cant find a part number for these 2 washers on service honda. Does anybody know what they are? 1st picture i have them circled in orange. Not sure why they are turned sideways. This is on a 86 250r

[oldskool83]

Honda 90401-HA2-000 thrust washer that is obsolete. Serice Honda is not that good of a site. I use partzilla.com They give me p/n's and then I go to ebay and find them normaly. Your SOL however myfriend.

http://www.partzilla.com/parts/search/Honda/ATV/1986/ATC250R+A/KICK+STARTER+SPINDLE/parts.html

[ATCT]

Kickstarter spindle washers: 90401-HA2-000 (DISCONTINUED)

Duplicate. Too slow.

[oldskool83]

here...over pay and buy them now.

http://www.ebay.com/itm/Honda-ATC-TRX-250R-OEM-Kick-Start-Shaft-and-OEM-Thrust-Washers-85-86-/321976720391?hash=item4af74edc07:g:BY4AAOSw5IJWhBI D&vxp=mtr

[ATCT]

You can maybe try these guys and see if they happen to have them in stock. Only problem with some of these dealers is that they don't update their online systems to state they are no longer able to get the part.

http://hondaparts.vanwallpowersports.com/p/Honda__/WASHER--THRUST-20MM/55167917/90401-HA2-000.html?partner=googlebase_adwords&kwd=&origin=pla

[oldskool83]

I would ask someone what ID and OD and thickness...then go buy something from another bike. ID is 20mm...OD may not matter really, maybe 30 or 32? my guess is TRX250R ones will work just fine.

[jrooster]

After looking into it some more, according to the parts list im looking at, for trx's, they dont have those two washers in that spot. Would this just be on 85' 250r's and maybe they changed it in 86?

[jrooster]

my motor Id number is 1004795. From what im finding thats a 86 trx250r motor which does not have these. Does this sound correct?

[oldskool83]

look at partzilla.com under year of your motor....it's not that hard boss. 1st world problems OMG!

[Mosh]

Only had the 3 piece setup on 85 engines. There was a service bulletin back in the day to upgrade to the 1 piece collar for kicker slipping. Get the 86 and up collar. Direct drop in without the washers. Toss out the old stuff

[newby200x]

This is the same part I'm looking for, it's discontinued everywhere I look.

[newby200x]

This should be the part # 28283-HA2-010

[jrooster]

Only had the 3 piece setup on 85 engines. There was a service bulletin back in the day to upgrade to the 1 piece collar for kicker slipping. Get the 86 and up collar. Direct drop in without the washers. Toss out the old stuff


Thanks for clearing everything up mosh.