PDA

View Full Version : 84 200s CDI and Coil replacement



rustyhondas
01-24-2016, 10:47 AM
I would like to improve the quality of spark on this bike
By throwing a fresh coil and CDI at it

It's got a new stator coil in it and the trigger and plug cap ohm out

The CDI on it is used off eBay about 5 years ago

Where do I get a new coil and CDI ,
Any one put one of the 15$ eBay ones in it?

I'm hoping to hear what I want to hear and that 25 bucks
In Chinese eBay crap would probably be fine
In this around the back yard trike

86125m
01-24-2016, 03:21 PM
OK the Chinese cdi box's are not as good of quality in my opinion it is better to buy this cdi http://m.ebay.com/itm/NEW-HONDA-ATC110-ATC125M-ATC200M-ATC200S-CDI-BOX-/191723092625?nav=SEARCH it is made by the original manufacture that Honda used. The coil is more than like
Y alright. But let me ask you does the bike seem to run alright because if it runs fine regardless of how the spark looks. I would not spend the money or the time in replacing these parts.


Sent from my KFFOWI using Tapatalk

rustyhondas
01-25-2016, 12:45 AM
It had a wimpy little spark but started first pull,,now it
Got cold out maybe the temp is a coincidence
But the spark is worse and won't pop off on ether

The plug wire has been skinned back on both ends
And a new ngk resistor boot , stator coil is a few weeks old
I should check it again though