250R gear shaft seal--question

[ATCT]

So I have a fairly decent leak coming from the gear shaft seal (I believe that's what it's called...see pic w/ shift arm removed). I've never replaced this seal before. Is this going to require me removing the engine and taking the side case off?

If I have to remove the engine, I'm half considering having someone do it as I don't have a lot of time at the moment and kind of want to get this thing running great before I take it out. I might even consider putting on the 300 kit I have at that point. So question 2: anyone in the Phoenix area you can recommend who might be willing to do this and not charge me an arm and a leg?

I appreciate the help. Here's the pic.

http://i256.photobucket.com/albums/hh180/ATCT_250R/IMG_5715_zpsldud1lxx.jpg (http://s256.photobucket.com/user/ATCT_250R/media/IMG_5715_zpsldud1lxx.jpg.html)

[Dirtcrasher]

Yeah pry it out with a pic or small screwdriver (pry it out without damaging to the case or shaft), spray it with carb/brake cleaner and get it set up,

Use the 3 corners of a baggie and lube it up. Slide seal over the clean parts and use a socket or tube to pop it in.

Make sure it isn't bent.......

[ATCT]

Thanks, appreciate it. Bushing ordered. Gonna give it a shot.

[RIDE-RED 250r]

If you can't get it out by the means DC suggested, you can thread a coarse self tapping sheet metal screw into the seal being careful to leave some of the screw head out to grab with a pair of vise grips and pop it out. And be careful not to run it in too far risking galling of the housing.

[ATCT]

Good idea. Thanks.